Page 1 of 80 123451151 ... LastLast
Results 1 to 10 of 794

Thread: A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

  1. #1
    mkl's Avatar
    Join Date
    Jan 2009
    Country
    Finland
    Region:
    Tampere
    Posts
    264
    Feedback
    98 (100%)

    Default A500 IDE interface which plugs to the 68000 cpu socket

    Note: previous CPLD code in v6x ram has bug, even if it may seem to work with some cpu's. V65 boards for sale will have fixed cpld code.

    Boards usually supplied without docs. For information (about needed wiring for A500,1000,2000) see http://www.mkl211015.altervista.org/ide/ide68k.html
    ChefDeadpool's CDTV install guide http://eab.abime.net/showthread.php?p=1233919&styleid=4

    Stock/interested lists:

    Soldered combination (for a500, cdtv, others) 8MB+ide(80€): 3 pcs
    Click image for larger version. 

Name:	20180708_233903-1.jpg 
Views:	191 
Size:	145.1 KB 
ID:	137178

    A2000 and probably A1000 can fit separate ide and memory boards stacked
    RAM(40€):
    4 pcs available have both config in and out, these will have 4-pin header with two grounds.)

    IDE(40€):
    2 pcs
    Click image for larger version. 

Name:	IMG_20180819_102308-1280x463.jpg 
Views:	71 
Size:	171.3 KB 
ID:	138484


    8MB v59 and (v6x) (/ with ide board) info: a posting in this same thread.
    Ide info below in this post.

    (link to old thread for ram )

    IDE boards

    Might include wires and pin header for int2 and ovr connection.

    Special ide-cf adapter for v402 for 10 euros or with a v402 board +5 euros. CF-card will be against the 68000 cpu chip and upside down. Female header or female header with extended pins on other side for connection of other ide bus device. Photo at post #461)
    5 pcs for v4xx without ram board, 5 pcs with clearance for ide+ram combination units
    Click image for larger version. 

Name:	Studio_20161003_141455.jpg 
Views:	664 
Size:	165.1 KB 
ID:	112955 Click image for larger version. 

Name:	IMG_20171031_182857.jpg 
Views:	253 
Size:	98.4 KB 
ID:	127942

    Information about these home made IDE interfaces
    WWW: http://www.mkl211015.altervista.org/ide/ide68k.html

    Zipped copy of www page (zipped 20.oct.2015 from 04.jan.2015 data

    Summary: Plugs to 68K socket, one 40-pin (or 39-pin) connector, "cf" versions also have cf connector
    Autoboots using A600's KS-ROM with driver for A600's ide interface (40.063/37.350/37.300)

    User needs to connect two (3 in 'cfidecp') signals to Amiga mainboard. A ground wire alongside with signal wires is recommended if the signal wires are not short and following ground trace on amiga pcb to reduce EMI caused by loop inductance.

    Cyberfred91's picture of placing a v402 board and cpu on A500 board (R8A1).
    (Click the following attach link if the thumbnail doesn't show up)
    Attachment 118080 Click image for larger version. 

Name:	a500+IMGP1500.jpg 
Views:	253 
Size:	161.6 KB 
ID:	133893
    No RAM in ide-board, so this board alone doesn't fully enable for example the Whdload floppy to hard disk installer 'retro gaming' utility.

    Different fuse options in v402 boards: CF cards use at most 100 mA, but cf-size Microdrive HDDs probably use more, so 200 mA resettable fuse may not be an option. 500mA resettable fuse should work, or the 2A block fuse/short circuit block. Also two CF cards on adapter at the same time may be a little questionable with 200mA fusing. later V4xx boards may have 3.3v regulator with current limit

    Some pictures:
    http://imgur.com/a/dWuGu https://imgur.com/a/CCtYc

    A600 cf adapter
    -10+ pcs: A600 Internal CF-card adapters to IDE connector 15 eur/pce.
    http://www.mkl211015.altervista.org/ide2cf/a6i2cf.html
    Version with also a extension header on top (for hard-disk cable or other adapter) 15€ /pce. Other guide "wing" of cf socket is removed to make space for top header connector.

    Mouse adapters
    -around 5 pcs stock Amiga ps/2 mouse adapters with 10pin header, 15€
    -PS/2 mouse adapter, Version for Atari ST for sale at Atari ST section.http://www.amibay.com/showthread.php...quot-firmware)

    Other items, Riser cards
    In other threads: vga-to-scart, 27c4096 to 27c400/800/160,
    2x29f040 flash plcc to 27c800 dip socket, plcc denise to dip socket adapter, ps2 mouse adapter for Atari ST, (68000 riser boards in this post, i will move into other post in thread)

    68000 DIP-64 riser, offset, A500 side slot adapters



    Shipping
    50 gram priority untracked 2.30€ europe, 3.50€ world
    Larger than 25 x 35.3 x 3 cm packages cost extra.
    Registered mail (signed for) with shipping code , + extra fee 10.30€ added to priority mail cost.
    Exprès letter up to 250 gr/over 3cm
    (not signed for, has shipping code): europe 16.30€, world wide 19.80€. Item tracking available for the following countries: Belgium Brazil Canada Denmark France Germany Ireland Iceland Luxembourg The Netherlands Portugal Spain Sweden Switzerland

    Payments
    My E-mail and paypal address: mlvhct@gmail.com
    1. Paypal "gift" (send you shipping address by PM) or add fees for ordinary paypal.
    2. "Euro transfer" to bank account with IBAN (+ BIC) number.
    Attached Thumbnails Attached Thumbnails IMG_20180207_110924.jpg  
    Last edited by mkl; Today at 14:40. Reason: Update

  2. #2
    BANNED StrontiumDog's Avatar
    Join Date
    Aug 2009
    Country
    United Kingdom
    Region:
    The Willen Lake
    Posts
    3,636
    Feedback
    195 (100%)

    Default

    PM sent

    1 CF Card (A600/A1200)
    2 Mouse adapters

    [EDIT]

    Payment sent
    Last edited by StrontiumDog; 20th June 2010 at 21:11.

  3. #3
    Inactive Member Eamoe's Avatar
    Join Date
    Oct 2009
    Country
    Switzerland
    Region:
    Lake Geneva
    Posts
    116
    Feedback
    13 (100%)

    Default

    PM sent

    1 CF Card (A600/A1200)

  4. #4
    Extr3m3ly l33t Amibayer!
    Staff Moderator
    mfilos's Avatar
    Join Date
    Mar 2008
    Country
    Greece
    Region:
    Glyfada/Athens
    Age
    40
    Posts
    2,619
    Feedback
    70 (100%)

    Default

    I would love some pictures of CFIDE68K V296 mate
    Btw, is the current version of A600/1200 Internal CF-card adapters to IDE connector, the same as the one I got from you some time ago?

    Visit my Amiga Blog: http://www.mfilos.com
    - A600: Vampire V2, 128MB, A604n, 16GB CF, Indivision ECS, RapidRoad USB, Ratte's auto RTG/ECS switch, Gotek w/HxC-LCD + Slim floppy (internal)

  5. #5
    Amibayer! Crumb's Avatar
    Join Date
    May 2008
    Country
    Madrid, Spain
    Age
    39
    Posts
    154
    Feedback
    6 (100%)

    Default

    @mkl

    Does the IDE adaptor work on A2000 with accelerators? Does the clockport interface work? What's the maximum length of the IDE cable that could be used?

    Any plans for this board with fastram? http://www.students.tut.fi/~leinone3/ide/im718.png
    Amiga roolz

  6. #6

    Default

    I'll take two mouseadapters.

    Sending you a PM.

  7. #7
    Amiga Rules Amibayer! HeZoR's Avatar
    Join Date
    May 2010
    Country
    Greece
    Region:
    Nomos Pellis
    Age
    40
    Posts
    476
    Feedback
    33 (100%)

    Default

    2 Mice adapters

    PM sent
    Last edited by HeZoR; 21st June 2010 at 13:31.
    :Commodore:Amiga:rainbow:Rulez:boing:

  8. #8
    mkl's Avatar
    Join Date
    Jan 2009
    Country
    Finland
    Region:
    Tampere
    Posts
    264
    Feedback
    98 (100%)

    Default

    Quote Originally Posted by mfilos View Post
    I would love some pictures of CFIDE68K V296 mate
    Btw, is the current version of A600/1200 Internal CF-card adapters to IDE connector, the same as the one I got from you some time ago?


    Yes, the a600 adapter is that same version.

  9. #9
    Amibayer!
    Staff Moderator
    johnim's Avatar
    Join Date
    May 2010
    Country
    England
    Region:
    birmingham
    Age
    42
    Posts
    11,764
    Feedback
    146 (100%)

    Default

    can i have a mouse adapter please
    pm sent
    payment sent
    Last edited by johnim; 22nd June 2010 at 19:43.

  10. #10
    mkl's Avatar
    Join Date
    Jan 2009
    Country
    Finland
    Region:
    Tampere
    Posts
    264
    Feedback
    98 (100%)

    Default

    Both completed a600/1200 cf adapters and most mouse adapters sold.
    I'll send sold items on wednesday.

Page 1 of 80 123451151 ... LastLast

Similar Threads

  1. Closed Amiga PSU and PC mouse adapter
    By Puni/Void in forum Found Archive
    Replies: 1
    Last Post: 4th September 2012, 18:59
  2. Closed Amiga mouse / mouse adapter
    By moijk in forum Found Archive
    Replies: 7
    Last Post: 3rd February 2012, 11:37
  3. Sold Punchinello III ps2 mouse adapter
    By bazzaq in forum Sales Archive
    Replies: 10
    Last Post: 25th June 2010, 13:14
  4. Sold Micromys V3 PS/2 Mouse Adapter
    By everblue in forum Sales Archive
    Replies: 7
    Last Post: 18th June 2010, 22:29

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •