I have for sale another GBA1000 do-it-yourself kit. The kit contains unpopulated PCBs for the GBA1000 motherboard, 68060 turbo card, Graka graphics card and Thylacine USB card. The kit also comes with programmed GAL chips, 68030 processor, CL-GD5434 graphics processor and some other parts for each board to get you going in soldering your own GBA1000 setup.
The kit contains the following:
GBA1000 Motherboard
- rev 01 PCB (blue)
- GAL chips, programmed complete set (6x GAL16V8, 4x GAL20V8)
- ispLSI chip, programmed
- 29F800 Flash chip
- M6242B RTC chip
- 68030RC40 processor (runs fine at 50MHz)
- 100-pin Zorro connector
- RJ10 keyboard connector
- 8-pin DIN VGA connector
- FPU socket
- 84-pin PLCC socket (for Agnus)
- 68-pin PLCC sockets (2x, for Amber and ispLSI)
GBA1000 Turbo Card
- rev 02 PCB (blue)
- XC95144XL chips (2x)
- XC9572XL chip
- 74ALVT16543 chips (4x)
- 33uH inductors (2x)
- 48R 6A filter beads (3x)
- 2A 50V diodes (2x)
- 4MHz 3.3V oscillator
- IDT502 PLL chip
- L5972D chips (2x)
- 10-pin ISP connector
Graka Graphics Card
- rev 3.3 PCB (blue)
- GD5434 GPU chip
- XC95144XL chip
- XC9572XL chip
Thylacine USB Card
- rev 01 PCB (blue)
- SL811HS chip
- GAL chips, programmed complete set (2x GAL16V8)
I will also give Mouser projects for all four cards. The projects contain most of the other components needed to buy to assemble the cards. Mainly only the custom chips, memory chips, some sockets and 23-pin DSUB connectors need to be bought from elsewhere. I can also assist the buyer in obtaining some of the other parts from the web.
For the kit I'm asking 400€ including tracked shipping to Europe. Buyer covers PayPal fees. Payment by bank transfer is also possible.
Also listening to offers.
Buyers with less than 10 feedback, please do not apply.
The kit contains the following:
GBA1000 Motherboard
- rev 01 PCB (blue)
- GAL chips, programmed complete set (6x GAL16V8, 4x GAL20V8)
- ispLSI chip, programmed
- 29F800 Flash chip
- M6242B RTC chip
- 68030RC40 processor (runs fine at 50MHz)
- 100-pin Zorro connector
- RJ10 keyboard connector
- 8-pin DIN VGA connector
- FPU socket
- 84-pin PLCC socket (for Agnus)
- 68-pin PLCC sockets (2x, for Amber and ispLSI)
GBA1000 Turbo Card
- rev 02 PCB (blue)
- XC95144XL chips (2x)
- XC9572XL chip
- 74ALVT16543 chips (4x)
- 33uH inductors (2x)
- 48R 6A filter beads (3x)
- 2A 50V diodes (2x)
- 4MHz 3.3V oscillator
- IDT502 PLL chip
- L5972D chips (2x)
- 10-pin ISP connector
Graka Graphics Card
- rev 3.3 PCB (blue)
- GD5434 GPU chip
- XC95144XL chip
- XC9572XL chip
Thylacine USB Card
- rev 01 PCB (blue)
- SL811HS chip
- GAL chips, programmed complete set (2x GAL16V8)
I will also give Mouser projects for all four cards. The projects contain most of the other components needed to buy to assemble the cards. Mainly only the custom chips, memory chips, some sockets and 23-pin DSUB connectors need to be bought from elsewhere. I can also assist the buyer in obtaining some of the other parts from the web.
For the kit I'm asking 400€ including tracked shipping to Europe. Buyer covers PayPal fees. Payment by bank transfer is also possible.
Also listening to offers.
Buyers with less than 10 feedback, please do not apply.
Last edited: