Offered Amiga 4000 Premium recap and upgrade service

daloway's A4000 premium pack is underway, SIMM sockets and A3640 upgrade is up next

1.jpg 2.jpg 3.jpg 4.jpg 5.jpg6.jpg 7.jpg
 
daloway's A4000 premium pack is is complete and shipped, new CIAs, new Paula, new Lisa, new RTC chip (all socketed). New SIMM sockets with metal latches, organic polymer capacitors (also on CPU card), this board is ready for this millenium.. :)

Before you let anyone to solder on your A4000 ask them to show close-up pictures of their previous work after SIMM socket change and check that there is absolutely NO damage - like on the pictures below.

20170328_185747 (Large).jpg 20170328_185847 (Large).jpg 20170328_214112 (Large).jpg 20170328_214144 (Large).jpg
 
Last edited:
Local order is complete, unfortunately there was heavy corrosion damage under U402 (audio), resulting to several open tracks and lost pads (and no audio out), these have been fixed with enamel jump wires.

Just another reminder to get recaps done in time. After this kind of damage it's impossible to restore the board to its' original state.

20170404_155230 (Large).jpg 20170404_155255 (Large).jpg 20170404_155316 (Large).jpg 20170404_155345 (Large).jpg 20170404_155354 (Large).jpg 20170404_155404 (Large).jpg 20170404_155503 (Large).jpg
 
Last edited:
Work underway on Corum's A4000T premium pack, typical corrosion on the A3640 CPU board because of the reverse polarity caps. Cleaned up well luckily, very little corrosion, few before/after pictures:

1.jpg 2.jpg 3.jpg 4.jpg
 
Corum's A4000T board is complete, full cleanup, recap with organic polymer caps, this board will never leak again. Shipping back early next week.

1.jpg 2.jpg 3.jpg 5.jpg 6.jpg 7.jpg 9.jpg 10.jpg 11.jpg 12.jpg
 
Last edited:
Received long time ago. Great job, best service on highest level. Positive fedback left.

daloway's A4000 premium pack is is complete and shipped, new CIAs, new Paula, new Lisa, new RTC chip (all socketed). New SIMM sockets with metal latches, organic polymer capacitors (also on CPU card), this board is ready for this millenium.. :)

Before you let anyone to solder on your A4000 ask them to show close-up pictures of their previous work after SIMM socket change and check that there is absolutely NO damage - like on the pictures below.

View attachment 119963 View attachment 119964 View attachment 119965 View attachment 119966
 
Interested for an A4000D board with a newly developed fault I can't track down.
 
Back
Top Bottom