i have 6128 & 664, i use them with RGB to SCART cables, the quality is way better on TV rather than on monitor. All You need is a dual power supply & rgb cable...
regards,
Viktor
Hi Macfan, there are several ways to connect Amstrad/Schneider CPC computers to the TV:
Amstrad/Schneider MP2 Modulator http://www.cpcwiki.eu/index.php/Amstrad_MP1/MP2_modulator
it is a dual power supply and Antenna modulator in one unit. The picture via antenna is not sharp, but there is a possibility to add SCART/RGB socket with an easy mod. Then You will get original Amstrad/Schneider interface with two outputs: Antenna and RGB/SCART.
2. Find a good power supply that has two voltages output +5V for CPC and +12V for 3" disk drive. if You will connect some other interfaces to Your CPC - +5V line should have at least 2, or better 3A
3. get an RGB cable for CPC. CAUTION! there are two versions of it. A cheaper with some shadow effect, and full pinned one, that gives crystal clear picture.
I can help You in any case You choose, i have MP2 Modulator and also RGB leads with power supply.
regards,
Viktor
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.