Project of Megachip for Amiga

Status
Not open for further replies.
Finally found the time to install this little beauty. It works great. But unfortunately, when I put my Vampire back into the machine, it just gives a black screen. A regular 68000 and 1.3 kickstart work fine. Has anyone else had this issue?
 
Reseated the Vampire and now it works. I must not have gotten good contact.
 
I am still eager to receive my notice. I have a couple original ones, but they dont fit well under most add on accelerators in the 500!
 
I also would like to hear what is happening with mine. There are people from my batch who got theirs already, I didnt hear anything. Can you let me know please. thanks
 
Will this work on an A2000 (Rev 6.x) ? I've read on the 1st post that the geometry is different, but what does that mean ? That it can't physically be fitted ?

If this is possible to work on an A2000 then count me in for an assembled one!

Thanks!
 
interested in one unit , will send pm

sold my A500 rev 6 in June 2018 , have to withdraw ..sorry
 
Last edited:
I am still waiting for Pm too.
Yes if not available thread should be closed... :/

Waiting for a reply
 
I am still waiting for Pm too.
Yes if not available thread should be closed... :/

Waiting for a reply
please be patient, Tuxbar is very buzzy, he will reply once he have time
don't forget - most things offered on Amibay are our hobby, rather than commercial projects..
 
Hi Tuxbar81.

Declaring interest
in one board assembled with Agnus
 
Last edited:
Still no info for Me

how many persons are still waiting for reply???


Regards

He has not been on-line since November but he did say he would PM members who have declared interest when he comes to them

Remember this is just one guy and we have put a considerable amount of work load on him, so it will take some time
 
Last edited:
Guys, tuxbar is dealing with some real world issues, including serious family health ones, that are taking his attention from the Amiga work. An update may have helped with expectations but he really is focusing on things more important.

He WILL be back when life calms down some. Please be patient.
 
Last edited:
I hope these serious issues have a positive outcome, Franck's a really good guy.
I wish, though, that he'd just release the gerbers and open source the project, so that others who are able to can duplicate his product, much like what John Hertell has done.
 
Status
Not open for further replies.
Back
Top Bottom