Final version of the new RCA connector panel for Commodore 1084-S (D1 and P1 also, but not for 1084) and for Philips CM8833-II (and not for MK1) has arrived! Maybe will fit to other type of crt's!
I have collected some crts from these types in the past few years, and I think this is the time to change the old one and rusty rca panels inside and bottom of the crt! A replacement for the original one is hard to find part at this moment, and there is no result with about one year discovering and mailing with many suppliers at China (and rest of world of course). Thats why born this idea at last Xmas... This is the final version, which looks pretty, and working well of course! Its solder 'n' s-video!
Also a good idea this panel instead adding a 4th ugly connector to the original plastic RCA panel if you would like to modding your Philips CM8833-II to get working with chroma+luma (=S-Video) signal!
Here are some pics with installed (soldered) panel to the crt mainboard and beside with the original ugly RCA connector.
Shipped with soldered three RCA connectors to the board, and one is separeted (for the non-modded CM8833-II crt's). You got with three different length stainless steel screw to get the best performance to mounting the panel at the chassis! The panel made from professional green colored pcb with LUMBERG high qualiy RCA connectors, and 0.8mm thickness pre-soldered copper rods for the bottom connectors.
Let's see the standalone pics:
RCA connector panel for Commodore 1084S P1, D1, and Philips CM8833-II price: €22 (was €20.49) (+shipping)
I have collected some crts from these types in the past few years, and I think this is the time to change the old one and rusty rca panels inside and bottom of the crt! A replacement for the original one is hard to find part at this moment, and there is no result with about one year discovering and mailing with many suppliers at China (and rest of world of course). Thats why born this idea at last Xmas... This is the final version, which looks pretty, and working well of course! Its solder 'n' s-video!
Also a good idea this panel instead adding a 4th ugly connector to the original plastic RCA panel if you would like to modding your Philips CM8833-II to get working with chroma+luma (=S-Video) signal!
Here are some pics with installed (soldered) panel to the crt mainboard and beside with the original ugly RCA connector.
Shipped with soldered three RCA connectors to the board, and one is separeted (for the non-modded CM8833-II crt's). You got with three different length stainless steel screw to get the best performance to mounting the panel at the chassis! The panel made from professional green colored pcb with LUMBERG high qualiy RCA connectors, and 0.8mm thickness pre-soldered copper rods for the bottom connectors.
Let's see the standalone pics:
RCA connector panel for Commodore 1084S P1, D1, and Philips CM8833-II price: €22 (was €20.49) (+shipping)
Last edited: