A3660 Rev 1 PCBs (Hidden vias)

Status
Not open for further replies.

chucky

Member
Rating - 100%
134   0   0
Joined
Jul 27, 2014
Posts
547
Country
Sweden
Region
Värmland
I now got a new larger batch of A3660 PCBs..

Same as last time except that I have made all vias hidden so it is somewhat more easy to solder around the resistors etc..

This is basically the A3640 for the A3000/4000 with the 040-060 adapter built in. so no need for adapter.. you WILL need a custom kickstart if you are using a full RC 060.


35Eur each + 4eur postage nontracked (15 tracked) payment via Paypal as gift or add 4% to cover fees.
(Swish accepted in Sweden)



Send me an PM if you are interested as it might be hard to follow a thread.
IMG_0366.jpg


I can also ship KEL connectors in a limited number from my private stock. 25Eur/each
 
Last edited:
Inerested in 1x but before some questions...

I withdraw my interest.Sorry.
 
Last edited:
It looks much nicer with the solder mask... I haven't even started with the other board but I'll take one of these too :)
 
A3660 PCB's

A3660 PCB's

I am interested in two of these boards. Do you have two available? If so, please supply details for payment to Australia. Thanks.


I now got a new larger batch of A3660 PCBs..

Same as last time except that I have made all vias hidden so it is somewhat more easy to solder around the resistors etc..

This is basically the A3640 for the A3000/4000 with the 040-060 adapter built in. so no need for adapter.. you WILL need a custom kickstart if you are using a full RC 060.


35Eur each + 4eur postage nontracked (15 tracked) payment via Paypal as gift or add 4% to cover fees.
(Swish accepted in Sweden)



Send me an PM if you are interested as it might be hard to follow a thread.
View attachment 128823
 
Hi, I would like 2 thanks. Can you give me a total including postage to Australia?
Thanks
 
had issues gettig jiffybags.. first batch sent today to: Digitalkeeper,marchigianluca,ajk,mattj,boingboi,cyebrstormer
 
What about a full list of parts needed (BOM)?
Any online guides to getting this working?
 
I will include a full BOM with the PCBs, gal-file information etc can be found at : http://wordpress.hertell.nu/?p=537

Anyway this is a list of components needed:
Resistors (All 0805 size)
3*1 Ohm
34*22 Ohm
2*33 Ohm
1*100 Ohm
3*470 Ohm
1*100 Kohm
24*1 Kohm
19*2.2 Kohm
16*3.3 Kohm
15*4.7 Kohm

Capacitators (All 0805 Size) (6V or more)
26*100nF
1*10nF
2*10uF
2*220nF
2*220pF
5*22uF Alu-Electrolyte
12*330nF
(C400 an 100nF can be replaced with a RH5VA43A)
Filters:
2*80 Ohm / 500mA
ICs:
3*GAL16V8-7
4*GAL22V10-10
3*GAL22V10-15 (Actually I use -10 all over)
9*74FCT243A
2*74F257
7407
74F04
74F139
74F1803 OR 74F803
74F32
74FCT244A
74FCT373A
74FCT374A
EP8700 OR Dallas DS1000-25 - Delayline
50 - 66MHz Oscillator 5V (Remember that above 50MHz overclocks parts of motherboard)
LT1084 3.3 Voltregulator (NOTE the 3.3 IS IMPORTANT!) Only for 060 usage.
CPU Slot Connector:
KEL 8817-200-170S-F
 
Status
Not open for further replies.
Back
Top Bottom