SolidCore
New member
NEW 2019 REVISION COMING SOON
Amiga mouse/joystick auto switch, also compatible with A600 case and CD32 controllers.
(zoom in)
Inspired by a Schematic by Mark Spankus from the 1990's. My design takes through-hole to a fully SMD design with pull ups on pin 6.
Is your hardware compatible?
Built for and tested on the A1000, A1200, cd32 (with extension cable/block), will work on a500-a4000 or other hardware with same pinout.
To ensure hardware compatibility please refer to your machine and controller Schematic, the following is required:
Pin 6 - Fire 1 / Left Mouse (clk cd32)
Pin 7 - +5V
Pin 8 - GND
Amiga 600 compatible
Amiga CD32
Tested and Working on CD32! CD32 games and WHDload games / mouse in workbench work as expected.
CD32 clearance fix is a d-sub 9 male/female back to back. this will be provided FREE for cd32 owners.
How did I make this cd32 compatible? A small jumper wire and diode has been added to fix the amiga pin 6 clk output for input 1, input 2 takes mouse.
(zoom in) . . . . . . . . . (zoom in)..................(zoom in)
1 unit left!!! 9 sold
If anyone is interested in taking some off my hands, I'll let them go at £12 a piece + postage fee (shipped from/within the UK). Includes free technical support & troubleshooting. CD32 Owners receive a FREE DE9 male to female DE9 back to back extension. Design may vary to Picture.
Sold Units/ Name / Country:
1 x Victor_CC - Spain
1 x CRP - Italy
1x MyNameisPox - USA
3x RiotRetroGaming - UK
Amiga mouse/joystick auto switch, also compatible with A600 case and CD32 controllers.
(zoom in)
Inspired by a Schematic by Mark Spankus from the 1990's. My design takes through-hole to a fully SMD design with pull ups on pin 6.
Is your hardware compatible?
Built for and tested on the A1000, A1200, cd32 (with extension cable/block), will work on a500-a4000 or other hardware with same pinout.
To ensure hardware compatibility please refer to your machine and controller Schematic, the following is required:
Pin 6 - Fire 1 / Left Mouse (clk cd32)
Pin 7 - +5V
Pin 8 - GND
Amiga 600 compatible
Amiga CD32
Tested and Working on CD32! CD32 games and WHDload games / mouse in workbench work as expected.
CD32 clearance fix is a d-sub 9 male/female back to back. this will be provided FREE for cd32 owners.
How did I make this cd32 compatible? A small jumper wire and diode has been added to fix the amiga pin 6 clk output for input 1, input 2 takes mouse.
(zoom in) . . . . . . . . . (zoom in)..................(zoom in)
1 unit left!!! 9 sold
If anyone is interested in taking some off my hands, I'll let them go at £12 a piece + postage fee (shipped from/within the UK). Includes free technical support & troubleshooting. CD32 Owners receive a FREE DE9 male to female DE9 back to back extension. Design may vary to Picture.
Sold Units/ Name / Country:
1 x Victor_CC - Spain
1 x CRP - Italy
1x MyNameisPox - USA
3x RiotRetroGaming - UK
Last edited: