Closed 68030 TK - Another accelerator card for Amiga A500/A1000/A2000 designed by Matze (aka Matthias Heinrichs)

Status
Not open for further replies.
This card has own boot rom (Oktagon/Oktapussy) so it doesn't need scsi.device in KS, this means it can boot even from 1.2, however 1.2/1.3 can handle OFS only (old file system), so Your CF card should be formatted using this file system. FFS will not work..
 
1.2/1.3 can handle OFS only (old file system), so Your CF card should be formatted using this file system. FFS will not work..
If it supports RDB, it should support booting (older? versions of) FFS in KS 1.3. If it doesn't though, just create a tiny OFS boot partition that loads the filesystem and immediately hands everything over to your main Workbench partition.
 
Package received today.. Looks really good, and even had an IDE to CF rear Zorro bracket included. Please give me a few days to actually get it installed :)
 
Interested in one unit, if any are available.

Edit: CPU Relocator received and feedback has been left.

Edit 2: Interest removed for the 68030TK as all boards have been sold for now, I will see what happens in the future.
I will settle for a 8MB+IDE for the time being.
 
Last edited:
Hi Victor.
Finally got around to test the received card and I had some problems, but in the end it seems it all boils down to my main a2000 being in need of service. It seems the card is working flawlessly.
Leaving positive fredback.
 
Please check if Your A2000 has all Bus fixes installed, these are important! Also PSU need to be serviced..
Ive cleaned my Mail box
 
Status
Not open for further replies.
Back
Top Bottom