Page 1 of 4 1234 LastLast
Results 1 to 10 of 40

Thread: Many Amiga Systems and HW Pieces For Sale

  1. #1
    Bunta714's Avatar
    Join Date
    Mar 2016
    Country
    USA
    Region:
    California
    Age
    36
    Posts
    159
    Feedback
    25 (100%)

    Default Many Amiga Systems and HW Pieces For Sale

    Hi everyone,


    Over the past several years, I have amassed quite a bit of Amiga hardware, but now I need to part with some things due to space and money restraints…and the small detail of a new kid (I’ll be keeping an A500, A2000, A1200, and CDTV!).


    I purchased many of the items from the wonderful users on this board, and I am really just looking to recoup some of my money, if possible.


    I live in the Anaheim, California area and can meet up within a reasonable distance from here.


    I have quite a few systems for sale and some parts as well. For the smaller parts, world-wide shipping is possible.
    For the larger systems, I would really prefer only a local purchase/pickup if possible for now. Unfortunately, I just don’t currently have time for the careful packaging and shipping that would be necessary for the larger, heavier items. I will mark the items that are for local pickup only.


    If I do not get any local buyers for the larger items, I may be able to open the sale to international members in the future.


    I prefer PayPal for payment.
    All prices do not include shipping or any PayPal fees.




    A4000D - NTSC (Local Pickup Only)
    https://imgur.com/a/WZt1QzG
    PRICE: 1400 USD

    The motherboard has been recapped and repaired, and the battery replaced.
    The System comes with a fully working A4000 keyboard and a mouse.

    The system works beautifully and includes the following specs:
    -2MB chip RAM
    -16MB RAM on the motherboard
    -256MB Z3 RAM from the BIGRAM+ board
    -A3640 CPU card with a 060 CPU adapter and 060 CPU/heatsink (will include the original 040 also)
    -KS 3.1 (modified version to work with 060 CPU/adapter)
    -MNT VA2000 video card with HDMI output
    -MNT VA2000CX video card expansion
    -1 Internal IDE CF card reader with rear access (currently connected to IDE and power; no software or CF card installed)
    -Floppy disk drive
    -1 internal IDE CF card reader with front panel access (not currently connected to IDE or power)
    -1 CD-ROM drive (not currently connected to IDE or power)

    A1200 - PAL tower setup (Local Pickup Only)
    PRICE: 1400 USD
    (Pictures to follow soon)

    This system runs perfectly and looks great internally. The case has a bit of yellowing due to age, but no actual damage. The motherboard is totally cleaned and recapped. It also has an S-Video mod and Audio mod done to it. An Amiga mouse will be included.

    The system has the following specs:
    -2MB chip RAM
    -KS 3.1
    -Apollo 1260 060 accelerator at 80MHz with 128MB of RAM
    -Mediator 1200 TX Black (with risers to allow installation of the FastATA 1200
    -FastATA 1200 (KS 3.1 installed)
    -3dfx Voodoo3 16MB PCI GPU
    -ATI Radeon 9250 256MB PCI GPU (brand-new, unopened)
    -Sound Blaster Audigy PCI sound card (I’m not sure if the drivers for this one are 100% working yet)
    -220V or 120V PSU (your choice)
    -Floppy disk drive
    -CD-ROM drive (not connected to IDE or power)
    -Internal IDE to CF card (no software or CF card installed)
    -90 degree PCMCIA adapter
    -PCMCIA WiFi card
    -Wireless USB keyboard adapter
    -PC-Key 1200 (I never got this to work correctly. There isn’t any visible damage to it and the Amiga keyboard Capslock key will light up when plugged in and the system powered on, but after that, no input will register. Consider broken, but possibly fixable)

    A3000 - NTSC (Local Pickup Only)
    https://imgur.com/a/vjYdAhT
    PRICE: 500 USD

    The system comes with a fully working keyboard and 2-button pregnant mouse.
    The system runs well but has the following issues:
    -Damage due to battery leakage (see photos). The battery acid has been neutralized, but I have not had the time to do any repairs to the board or chips around it. I think the damage has also affected the VGA output.
    -The VGA out does not work correctly. I think this is from the battery leak damage.
    -The disk drive works fine, but the eject button is broken off and missing.

    Specs are as follows:
    -2MB chip RAM
    -16MB RAM via the RAM adapter with a stick of 32MB RAM installed.
    -KS 3.1
    -SCSI2SD adapter (no software or MicroSD card installed)
    -Floppy disk drive


    SOLD to milkawax
    A600 - PAL
    https://imgur.com/a/lB6WO6q
    PRICE: 650 USD

    The motherboard has been totally recapped, cleaned, and works beautifully.
    The system includes an Amiga mouse along with a 220V power supply. I also have the original box, but it might be too difficult to ship safely.

    The system has the following specs:
    -Vampire 600 V2
    -2MB chip RAM
    -Internal IDE to CF card reader (no software or CF card installed)
    -Floppy disk drive


    A500 - PAL (Local Pickup Only)
    PRICE: 500 USD
    (Photos to follow soon)

    The system works beautifully and includes an Amiga tank mouse.

    The system has the following specs:
    -Vampire 500 V2+
    -512MB RAM expansion
    -Floppy disk Drive
    -Mechanical C= key keyboard

    A1000 - PAL (Local Pickup Only)
    PRICE: 400
    (Photos to follow soon)

    The system is stock and works well, but has quite a bit of yellowing on the case. This is an early PAL A1000 model that still has the daughterboard usually only found in the NTSC A1000s. An A1000 keyboard and A1000 Amiga tank mouse (90 degree connector) are included.

    Specs include:
    -256K front RAM expansion
    -Floppy disk drive

    Amiga CD32 Console - PAL
    https://imgur.com/a/RPHxkoG
    PRICE: 300 USD

    The system works well. The capacitors that were originally installed backwards at the factory have been fixed. The RF adapter has been removed and the console has been modded for RGB output.
    The system reads original discs perfectly and reads burned discs well, depending on CD-R quality.
    The console has some small cosmetic blemishes that do not affect operation.

    Comes with:
    -Generic Power Supply (US) or original 220V power supply
    -Generic Controller
    -RGB SCART cable
    -Replacement Laser


    SOLD to Kronusofchaos
    Apollo Vampire 500 V2+
    https://imgur.com/a/XcwL1t7
    PRICE: 350 USD

    This accelerator is brand-new and has not been taken out of the plastic bag.



    SOLD to wkend
    Great Valley Products (GVP) A3001 (Impact A2000-30) with 68030-RAM8 Memory Expansion
    https://imgur.com/a/a6NHDDN
    PRICE: 250 USD

    The boards both work perfectly and run great.

    The CPU and RAM have the following specs:
    -030 CPU and 68882 FPU at 25MHZ
    -4MB (4x1MB sticks) of 32-pin Nibble RAM



    SOLD to Beska
    Computer System Associates (CSA) Derringer Amiga 500/1000/2000 030 Accelerator Card
    https://imgur.com/a/GNsbljs
    PRICE: 300 USD

    The card is in excellent shape and works perfectly.

    The board has the following specs:
    -030 CPU and 68881 FPU at 25MHz
    -32MB RAM (1 stick)


    SOLD to stachu100
    Amiga 4000 (A4000) Motherboard, Daughterboard, 3640 CPU Card
    PRICE: 500 USD
    https://imgur.com/a/0C5uzBQ

    The boards have been tested with hardware from the above A4000 system (Motherboard RAM, Z3 BIGRAM+, CPU card, PSU) and all work fine. However, there is some damage from battery leakage (originally battery removed) on the motherboard and the Amiga RGB port on the back was crushed a bit during shipping. After straightening the pins and metal, the port is working fine.

    SOLD to bdgusa
    Squirrel PCMCIA SCSI Kit + External SCSI CD-ROM Drive

    PRICE: 100 USD
    https://imgur.com/a/9w4IXv7



    SOLD to wkend
    IDE4Zorro
    PRICE: 100 USD
    https://imgur.com/a/nlhqtFq


    SOLD to CrashSerious
    Alfa Data AT-Bus 2008 + 8 MB RAM

    PRICE:100 USD
    https://imgur.com/a/xau7iba
    Last edited by Bunta714; 22nd June 2018 at 04:31. Reason: Updated sold items.

  2. #2
    Kronusofchaos's Avatar
    Join Date
    Jun 2014
    Country
    USA
    Region:
    Texas
    Age
    47
    Posts
    149
    Feedback
    12 (100%)

    Default

    Interested in the Vampire card.

  3. #3
    Beska's Avatar
    Join Date
    Nov 2013
    Country
    Canada
    Region:
    Alberta
    Posts
    61
    Feedback
    10 (100%)

    Default

    Interested in the CSA Derringer Accelerator card

  4. #4
    WaveRider's Avatar
    Join Date
    Jul 2016
    Country
    USA
    Region:
    Arizona
    Posts
    63
    Feedback
    3 (100%)

    Default

    Hi second in line for the Vampire 500 v2+ card.

  5. #5
    Bunta714's Avatar
    Join Date
    Mar 2016
    Country
    USA
    Region:
    California
    Age
    36
    Posts
    159
    Feedback
    25 (100%)

    Default

    PM from Kronusofchaos received. Will send shipping quote asap.

    Waiting for PM from Beska so I can check shipping for them also.

  6. #6
    CrashSerious's Avatar
    Join Date
    Feb 2018
    Country
    United States
    Region:
    Missouri
    Posts
    27
    Feedback
    4 (100%)

    Default Interested in Alfa Data AT-Bus 2008 + 8 MB RAM

    Declaring interest in the Alfa Data AT-Bus 2008 + 8 MB RAM, It doesn't say local pickup only. I assume you'll ship?

    Bought a 2000 today to sit along side my 500, and the A2090... just isn't going to do it for me.

    Please PM with Paypal (F&F) address.

  7. #7
    stachu100's Avatar
    Join Date
    Aug 2009
    Country
    Poland
    Region:
    mazowieckie
    Age
    45
    Posts
    3,062
    Feedback
    330 (100%)

    Default

    Declaring interest in:

    "

    Amiga 4000 (A4000) Motherboard, Daughterboard, 3640 CPU Card

    PRICE: 500 USD

    (Photos to follow soon)

    "
    With shipping address in USA.
    Waiting for photos.

  8. #8
    Bunta714's Avatar
    Join Date
    Mar 2016
    Country
    USA
    Region:
    California
    Age
    36
    Posts
    159
    Feedback
    25 (100%)

    Default

    Hi all.

    Images added for A4000 boards, GVP 3001 boards, Alfa Data board, and IDE4Zorro board.

    PMs received from and replies sent to Stachu100 and CrashSerious.
    Will be checking shipping rates later today.

  9. #9
    Bunta714's Avatar
    Join Date
    Mar 2016
    Country
    USA
    Region:
    California
    Age
    36
    Posts
    159
    Feedback
    25 (100%)

    Default

    Shipping quotes sent to those first in line.

  10. #10
    wkend's Avatar
    Join Date
    May 2018
    Country
    United States
    Region:
    Seattle, WA
    Posts
    10
    Feedback
    1 (100%)

    Default

    Interested in the IDE4Zorro.

Page 1 of 4 1234 LastLast

Similar Threads

  1. Sold Amiga Parts & Pieces for sale.
    By FeedingDragon in forum Sales Archive
    Replies: 43
    Last Post: 19th January 2018, 10:16
  2. Sold Amiga Pieces
    By maw2k in forum Sales Archive
    Replies: 10
    Last Post: 18th May 2016, 01:22
  3. Closed Amiga OS4.x Systems For Sale LOWER PRICES
    By Ruud in forum Sales Archive
    Replies: 33
    Last Post: 21st November 2014, 17:11
  4. Closed Various Amiga systems, blizzard, games for sale
    By anagrama in forum Sales Archive
    Replies: 0
    Last Post: 12th December 2010, 21:29

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •