Buddha Flash Phoenix Edition Query

zimgr5

New member
Joined
Feb 1, 2009
Posts
38
Country
now Germany
Got this controller & long ribbon today, but have questions and don't want to start new thread :

- in my A3000T, should it be inserted into Zorro soctet "as-is" or upside-down ?
- where is pin0 located ? (don't know how to connect ribbon)
- which IDE connector from these two is primary and which secondary ?
- does it works with DVD drives or only CD ?


Sorry for those questions but searched everywhere & can't find any manual for this :shrug:
Thanks.
 
Re: Buddha Flash Phoenix Edition Query

@zimgr5

New thread created & post moved here for you :wink:

TC :mrgreen:
 
Re: Buddha Flash Phoenix Edition Query

@Zimgr5

Right now for an answer to your problem :D

Have a look at SkyDivinGirls A4000 piccy's in the following link which show the Buddha installed in the Zorro Slot.

This should answer your questions and give you the confidence to install the card :wink: .

viewtopic.php?f=89&t=2214&start=0

TC :mrgreen:
 
Re: Buddha Flash Phoenix Edition Query

Yep! Look at the pictures to see where PIN 1 is located. The 44-Pin (Small) connector is Primary and the 40-Pin (Large) connector is secondary. I'm running all the drives in my Amiga from the Buddha. See the Buddha Web Site for a list of supported drives. You can get the drivers from Here.

Ciao!

Heather
 
Back
Top Bottom