question regarding capacitors

scrappysphinx

Confused retro man
VIP
Joined
Jan 30, 2008
Posts
7,964
Country
UK
Region
Nottingham
Hi all, i am looking to install an AV port into the back of my Sega Master System 2
I am following this tutorial and it states i need some Strip Board/Vero Board, 4 220uF 10v Capacitors & 1 10uF 10v capacitor.

I have managed to find what i believe to be suitable, din connector, strip board and 220uf 10v capacitors but i am stuck finding a suitable 10uf 10v cap.
Can anyone tell me if these would do the job (although rather expensive) or these (slightly higher than 10v at 25v but a lot cheaper).

All links are to ebay auctions but they are all Buy It Now items so i don't believe i'm breaking any rules.

Thanks for any help and will repay any answers with hardware pron when i actually do the mod.

Mike
 
Re: question regarding capacitors

If you don't find 10V units, any bigger voltage will be OK.

I even believe the circuit will run OK with capacitors with less voltage units, since the video circuit is only a few Volts (don't rely on this).
 
Back
Top Bottom