Recent content by demolition

How about putting a riser underneath the rgb2hdmi pcb? Would that not give the HDMI port sufficient clearance? I guess if you are using it inside an A500 chassis, then you don't have much clearance in the height but is it really that tight? It would probably be a problem in my Checkmate...

Just in cased anyone else have stability issues like I did, then replacing the CPU socket and recapping the motherboard (might as well) seemed to do the trick for me as it has been running for several hours today without problems. :) These old sockets are not as good as they used to be (and they...

Item received yesterday - will leave FB. :)

Did you also ship one to me? Because you confirm to have shipped to many people who paid after me but I could not see my name in any of the posts.

Payment sent.

Interested in one - PM incoming.

Thanks for the offer but unfortunately shipping would be a killer, not to mention trouble with customs. You might be right that the culprit could be the CPU socket. I have it installed in a turned pin socket (as a riser) to clear the components on the MB, but the socket in the motherboard is...

I cannot seem to get my card 100% stable. It crashes randomly but it doesn't seem to be related to heat as it still crashes at the same rate (every 15~30 mins) with the cabinet open and a fan blowing air across the board. So I wonder of clocking it down a bit would help, like to 40 MHz, seeing...

I have good results just using oxy additives with luke warm water to treat keycaps for example. No need for hydrogenperoxide, or sunlight for that matter. Usually I soak it 2-12 hours depending on the condition. Peroxide might also work fine on its own but it is a lot more expensive. :)

30% solution should be handled with extreme care. Handle it like you would concentrated acid. A drop in the eye could make you blind on it and mixed with the wrong items it could react explosively. And I don't see why you would use warm water - cold water is safer to handle and will not make...

Just remove any dirt and dust and maybe clean the edge connector with isopropanol but besides that I would leave it intact. As the other poster writes, retrobright is quite controversial and it is a one-way street. Once it has been treated you can never undo it again and it will turn many people...

I guess this would be time for Amibay to get his/hers first personal Amiga? Myself, I got my A500+ at 12 years old so 13 years is due time for this to happen before it has to fight for time against mopeds and parties. :)

You can see them here:

Was it actually one of the official TF boards? There are people out there selling copies. Also, I'm surprised they can block you from opening a dispute as long as you react in due time.

Are you sure about this one? I did manage to find one of the adapters that you specify and I also had one of those 8GB blue and white cards from ebay. It is also only about 3.3MB/s. There is a common problem with SysInfo that it tends to report 6,553,500 bytes/s or 3,276,700 bytes/s for fast...