Recent content by DonutKing

Changing to scsi.device version 43.45 fixed it :)

Need some assistance please :) Trying to setup a 16GB CF card for my A1200 rev 1D4 with 3.1 ROMs. I followed the guide here: https://16bitdust.wordpress.com/2015/10/13/partitioning-16-gb-compact-flash-card-with-winuae-and-pfs3/ I have partitioned the card into a 1024MB partition for DH0...

Hi I'd like a red cable and a boot selector please. Sending PM...

If you aren't able to find anyone local, I can do this for you. Shipping here and back won't be cheap though

This is great news! Now to track down the right agnus... Are we limited to the two part numbers on the image, or would other models of Agnus work?

Sorry but I no longer have any of these available.

I'd say the Amiga has a larger following than retro PC's so there is always going to be more demand for Amiga projects, but there are a few new projects going on for old PC's as well. eg the Dreamwave S1 waveblaster board; Sergey has cloned a whole 8088 PC including Adlib and VGA, with a...

I had the idea of making a DF0/DF1 switch that changed when you held down a mouse button on startup - similar to how some of those kickstart switchers work. The idea was that you could hook up the gotek externally, keep the real floppy drive inside the amiga, and switch between them by holding...

This is just a thought I had today. Floppy emulators like the gotek or HxC are quite popular now, but for various reasons people may want to leave the original floppy drive inside their amiga, and use the gotek externally. I see that swapping DF0 and DF1 can be done by lifting a couple of pins...

Received, all working, positive feedback left :)

Interested pending postage costs... sending pm

I'd like it to attempt a repair, but I'm not anywhere near Canberra. You aren't heading up to QLD for the holidays are you ? :P

I have the opportunity to swap my Rev 6 A500 for a Rev 8 A500+ I have a 2MB Trapdoor expansion, with a lead that goes to the Gary chip. I have a photo and manuals in this thread: https://www.amibay.com/showthread.php?62874-help-installing-2mb-A500-trapdoor-expansion I only have 512KB of ram...

I know this thread is a few months old but I wanted to share my experiences. I built a couple of these memory expansions and tested them out. While they do work with the ACA500, I have found that enabling them causes the CPU to slow down to 7MHz (the stock speed of the A500). The ACA500 comes...

Yes I do, I'll send a PM.