I have an image I use for my NTSC CD32 and the screen seems to power up to a PAL resolution so I can not see all the screen.
When Workbench loads I test all the standard resolutions and they work great with my PVM but after testing I can not keep the resolution permanent.
I also set to PAL...
I received notification about being about to get a Vampire for the 600 which is great. With the price increase (I'm not complaining) I feel that I might wait for the 500 or 1200 version. If I lose my place with the 600 Vampire will this hurt chances of getting the 500 or 1200 version in the...
I've been looking for the adf file for my Gotek. I found one with Archon I and Archon II also in the same ADF with One on One basketball but get Guru errors on my Amiga 500 with 1.3.
Anyone aware of a good adf of One on One?
Thanks1
Thank you for the response! I tried the jumper with no luck. I then found out the cable connector is upside down .. i.e. the notch on the cable must go in the up position even though the gotek has a place for the notch on the bottom and the cable connects normally when used with the internal...
I bought this DF0 selector: http://amigastore.eu/en/485-df0-selector.html
and this external drive Gotek cable: http://www.ebay.fr/itm/External-Amiga-drive-adapter-cable-for-Gotek-HxC-Usb-floppy-emulator-A500-boot-/272329982351?hash=item3f6821c18f%3Ag%3AUBMAAOSwtUtXA4N6
My hope is to use the...
I have a three Amiga 1000 computers but no kickstart disk! I've tried making my own multiple ways and the systems will not boot to it. The disk starts to boot and sounds ok but then goes back to kickstart. I do not think all three drives are bad so I need a disk.
Thank you...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.