Recent content by gump

Hi, i just stumbled into this thread Looking for johnims posts about mediator setup He did incredible jobs with making guides and hand out mediator files etc. Without him i would have been balled riping my hair off today R.I.P John ♥️

hi, i want to buy, rent, loan or someone to beep all signals on this special 72 pin PROTAR memory stick. please help. i got a huge amount of EDO/FPM 72 pins here i wanted to see if it can be hacked to work in protars. help me and i send a memory for free perhaps ? i got the protar controller but...

Yeah i know a guy who ordered from kipper from order to deliver was like only weeks. (That lucky basterd) But majsta and kipper lives in different countrys. They order components world-wide. People that ordered both from kipper and majsta are ofcourse delayed. Im just waiting. I heard alot of...

If you bought from Majsta he will PM you for confirming and details.etc. before he send the card. Kipper do his own order list.

I sad it before. And i say it again. Since i got a sata adapter that dont understand built in "3.1 scsi.device" i hope the "delay" of v2 card means updated core with sd-card hdd support. This is not a problem anyway. I can use regular cf adapter instead. If kick 3.1 can be patch after cold boot...

A second option is to buy a 20cm ide cable. And let the cable go between vampire and motherboard. Im awaiting 20cm cable from aliexpressi try this first on aca620. Until vamp 600 arrives I have tried to do the "other way around" with cable it works with cf card. But i got Sata adapter and ssd...

Nice :) Not too long ago i recaped my mobo. And removed modulator for hdmi :) I hope that the 10 cm long hdmi IN with both hdmi and dvi out will fit where RF was. :) Aos3.9 i owned for decades. Has also custom my original kick 3.1. To 3.1/3.9 switch. Needed for cheap sata adapter to boot my ssd.

This is what i hope too. I allready got ecs indivision ECS and subway usb controller. At least i hope the controller will work. Vampire should not atleast interfere with the left 1200 clock port. But you never know. With different drivers both clockport on A600 works. clockports placed in 2...

Trydowave just managed to fix it :) Read a few pages back. Find a 3.1 file a500.rom file some pages back you will find example on correct filename. If you cant input the file in a emulator etc. You can try to byteswap the file in msdos or something then crc check it and rename it to a bin file...

@trydowave Excellent that you sorted it out :) I didnt mean to be rude. If i was. I apollogise. I totaly forgot that rom files for emulators etc often are byteswaped, encrypted etc :)

Yeah. I totaly forgot. All or some of the cd files are probably swapped files or they wont work in x86 cpu:s in winuae etc. It might work to byteswap them. I do not have any cloanto cd. I would have checked to help you all if i had any cloanto cd :/

Please understand... Kickstart 500/600/2000 is the very same kickstart Its for the 16 bits amigas. A12000 kickstart will do failure on kickstart becouse of 32bit amiga. 1200 etc is split on 2 16 bits roms. Thats why 2 roms chips. Just checksum the file you beleave in. Regardless if The name...

If you got a kickstart files on cloanto cd. Just check one of them a500, a2000 or a600 rom file. If you find the right checksum on one of those. Check them with a software. You have plenty of answers to that. When you find the right rom file Rename it to trydowave_kickstart3.1.bin then just...

You need the kickstart 3.1 512kb from a A600 (or 500/2000) or from cloantos cd. You can grab it with kick2f from aminet. It will print the crc number. You only need to upload the 512kb kickstart with matching number. You have a link with instructions on the first page. Download an ftp client...

Yeah grabkick works and is gui graber Kick2f from aminet grab kick and give you a textfile with the md5sum. I doubble checked mine in pc.