Recent content by Higgy

@amigasquirrel Hi, I've got a similar setup but original Rev B PCB. Buster 11 is fitted. I will have to check versions of software I am on. HDMI cable can make a huge difference. Not seen it on my A4000, but saw lots of artifacts on my A1200 PiStorm. So definitely worth trying a different one...

I was just going through the MiST forum and with regards to the Shared Folder, and I found this from 2021. There seems to be an issue if you use a exFAT formatted SDcard which I now do because my HDF is 32gb. But it sounds like there is a solution: You can still create a second FAT32 partition...

I saw you sent me a PM. I will try to put info here, then others might benefit. I just checked my 'drawers of Doom' and I did buy a Ethernet-USB adapter but I have never used it. Also the shared folder does not get much use from me. As I generally have a downloaded Amiga image e.g. Amiga...

Just to say that MiST has RTG and shared folder support. Also 'AmigaVision' which features heavily on the MiSTer forum works fine on MiST. If you don't know, this is the main hang out place for MiST: https://www.atari-forum.com/viewforum.php?f=115

After the ongoing wait (6.5yrs) for my A1200 CD32 Special Ed case and key caps, I felt fed up with the whole crowd funding thing. But this project brought me back (I have an OG Vectrex hanging on), only for another fcuk up this time by Kickstarter's website. I got allocated a Founders Edition...

Just to confirm I have used 2 of these modules in an Amiga GVP HD8+ expansion and they work fine. (y)

Hi, Sorry to hear about your friend. I am based in South Somerset. I will drop you a PM as I might be able to help with capacitor/battery removal and replacement. Regards

@cactoos your first Goliath picture started my nervous twitch 😂 I killed my A1200 back in the day by re-wiring the Amiga side. I did not note that the colours were different and just matched the colours up :(. -never thought about getting it repaired as it gave me the reason to go to Pentium 2...

I've wired out the hardware switchable 50/100Mhz jumpers to a switch mounted at the back. I am surprised more people don't do this. I only want to run at 100Mhz for demanding demos and Doom type games. So I just turn off the computer (!!don't switch it with computer on!!) move switch to 100Mhz...

Payment sent.

Checked my A600 and the soldering around CPU is factory, so I will PM seller for payment details.

Declaring interest. I just need to pop my A600 apart to make sure that the CPU soldering where this plugs onto has not been fiddled with. No reason to think it has, just best to check! Hopefully get this done tonight. Thanks

Card arrived safely. Rev 6 fitted and all working as expected. Many thanks. Just wiring up a rear switch to Jumper for 50/100Mhz operation (I don't need 100Mhz for most tasks). Will also wire the 100Mhz switch position to turn on a 5/12v for cooling (probably take fan power from spare PSU...

Payment sent

Declaring interest. Interested in 1 board no CPU. PM sent with postage questions. Thanks(Marked as sold/completed by DjCook)