Recent content by JonB

AmiBay I couldn't work out how to mark it as sold in the forum. Have updated the post with buyer's ID. As of this post, the package has been collected and is in its way. i have provided tracking details to the buyer.

SOLD to marianpsd2008.

SYSINFO output SYSINFO output Hi Please refer to the pictures below. sysinfo speed.jpg shows the SYSINFO speed report. With the e-matrix card, the A1200 is about 5x faster than a standard A1200, hence the comment "Smell the rubber?". It confirms a 68030 running at 40Mhz. Built in RAM.jpg...

Yes - I pulled the spec from a web site : https://www.vesalia.de/e_ematrix1230.htm Unfortunately I am not an expert at this or the A1200 so I went with the e_matrix description. Happy to amend the description if need be.

Selling an e-matrix Amiga 1200 accelerator board with 68030 and 16MB EDO RAM Specifications: 68030 @ 40 MHz 16 MB RAM battery-backed real time clock no address conflicts with PCMCIA cards It has the ability to take a 68882 FPU (not installed on this one). Please see pictures for...

Hi Per the title, I'm looking for one of these: 360k DS DD full height Tandon 5.25" floppy drive, as fitted to PETs, TRS-80s, IBM PCs, Superbrains and probably a load of other early 80s machines. Please reply here, or PM me if you have one spare! Thanks JonB

uIDE supports CP/M Plus on the PCW and 6128. So if your game runs under CP/M you should be able to copy and run from uIDE. One example is HeadOverHeels of the PCW8256, it runs fine from CP/M. However, it is not a floppy drive emulator and it does not have AMSDOS support at the present (so I...

Hi I am offering a new IDE adapter for Amstrad Z-80 based microcomputers. They are universal and will connect to any Z80 computer via a shim card interposed between the Z80 and its socket (assuming it is socketed). However, there are also specific connectivity options for Amstrad PCW and 6128...

I am offering a new IDE adapter for Z-80 based microcomputers. They are universal and will connect to any Z80 computer via a shim card interposed between the Z80 and its socket (assuming it is socketed). There are two variants: uIDE-8, which uses A7-A3 of the Z80 address bus to decode the...

Long shot time! Need a transformer for a 4032 "Fat 40" PET. Primary is 240VAC Secondary 1 is 0-20v (powers the 12" monitor) Secondary 2 is 8-0-8VAC Secondary 3 is also 8-0-8 so I might be able to use just secondary 2 for both. I'm not sure what the rating is but I probably need 1.5A per...

I'm about to get one of these with disks. I'll let you know what there is.

Not sure I'm allowed to bump this post, but there you have it. I still have about 12 sets left if anyone is interested.

£1.50 should cover it. :)

Hi I have here some NOS MOSTEK 4116-N3 DRAM memory chips as used in many 8 bit micros (PET, APPLE-II, Spectrum 48, Dragon, etc) and I'm offering them in lots of 8 chips for £7.95 per lot plus p&p and PayPal fees. Please note, they're untested at the moment, but look like they have never been...

I have some here. About 200 of them, selling in lots of 8 for £8.95 plus p&p. You'll be needing two lots. They are MOS 4116 2N which should be fast enough for "Puff the Magic Dragon". :)