Recent content by Madowax686

Interest withdrawn. (was previously declared here)My bad I didn't know can't fit the HDD cradle with the indivision, withdrawing interest.

Declaring interest.Interested in the a1200 one(Interest withdrawn here)

Declaring interest. In 1x 4000D(Marked as sold/completed by hese)

Received few days ago, packaging was great, the adapter replaced the one I 3D printed few years ago, night and day difference, superb quality in the metal bending, edges well rounded, multitap power adapter super comfortable and the 3d printed plastic spacer for the multitap adapter proves the...

Payment sent, PM with complete address also sent

Declaring interest. Interested in one unit(Marked as sold/completed by arymanx)

For those interested, this adapter solved also a problem on my old multisync microvitec crt series 13, which was very sensitive if placed over the metal chassis of my A4000, it was catching some spurious signals which resulted in random and occasional interferences on the screen, with the...

Received, db23 just soldered, working beautifully. Thanks

Declaring interest. x1 without DB23, shipping to Italy(Marked as sold/completed by sampedenawa)

Ok, so you can rest assured that everything else on your WE works up to a 44mhz CPU crystal, your problem could be the 060 CPU you are trying to overclock or the 68060 adapter not supplying enough juice to that 68060 to overclock to ~70 MHz range. When overclocked the 060 draws more and more...

That's interesting. Have you ever tested your warp engine with a 40 MHz 68040? Are you sure your ram modules work over 33Mhz with your WE?

On my WarpE I have tested a couple of rev. 5 and they boot @80mhz @3.45V with a 40mhz crystal, but they are not stable on the long run, while with a 68040 @40mhz the card is fully stable, the sweet spot for both my 060 rev 5 is @75 MHz with a 37.5 MHz crystal @3.45V, then they are completely...

Interest withdrawn. (was previously declared here)

My bad, I totally forgot about this one, due to the mobo revision and to the high shipping cost I decided to withdraw my interest, sorry for the late reply.

Thanks for the reply, I'm sending you a pm with a couple of questions.