Recent content by Milesunder

Hi all, I have decided to part with my Amiga 4000 Tower. It’s an Amiga Technologies version and is in fairly good condition. There are scruffs on the paintwork but the door is fully working and the glass is in tact. The A4000T is powered by a Cyberstorm PPC and when last tested the ppc worked...

Declaring interest.(Interest marked as expired by Niezgodka)

Hi, is this still available and are you UK based?

Declaring interest.

Count me in the club. I have a AT A4000T with a CyberstormPPC with a few other goodies inside.

Sending pm

Declaring interest.(Interest marked as expired by Pauli77)

Just tested pin 46 on the 68000 and pin 1 on the KS socket and I got continuity. Is this to be expected?

Declaring interest.(Interest marked as expired by Pauli77)

Thanks. So if I put a probe on a18 on 68000 and on a17 on kickstart there should be continuity?

Declaring interest.(Marked as sold/completed by arymanx)

Thanks Levo, In respect to pin 1 do I need trace where it goes to? Any ideas where it goes to? 🙂

So it is back together. The good news is I appear to have soldered the new socket incorrectly. And it is still running v2 the bad news is the 3.1 rom I tried didn’t work. I will try a couple more. Any ideas?

Yes it does. I have cut the trace between the two pads that run parallel to the socket and now there is no continuity on pin 31. Just putting the board back together to see if it works (fingers crossed)

So I have removed and resoldered the socket and I am still getting the same issue. So are we saying that pin 31 is grounding out and this is why I am having the issue? Interestingly it appears I have a jp2 on my motherboard which later revisions don’t have. If I cut the trace would that solve...