Recent content by supaduper

If you are going to use a long cable on the CD32 than you will really need a buffered IDE adapter

Hi yes it is a scsi version problem that I found with AGS and the CD32, here is my solution that I posted on another forum: ------------------------------------------------------------------------------------------------------------ To run AGS on CD32 with TF360 then add the C:cpuspeed...

Drive received in prefect condition, many thanks

Hi all you retro nuts, just a reminder to Donate to Amibay if you can as I know the Mods on here are too shy to ask ! Best wishes, Supaduper

Declaring interest. In working Saturn

Drive arrived in perfect condition, many thanks

Declaring interest. T34, I will email you

Normally when hot plugging floppy into Amiga you most times damage the EVEN CIA chip so swap over the CIA chips and see if you get any different symptoms or the drive then works

Ah I see, my records show you bought it in 2019 , 6 years ago ! but I will replace it :)

It was Amigastore who relaced the guys faulty TF330 :) The Xilinx chip was faulty

there was one guy with your same problem and his board was faulty, the seller replaced it

Yes the two left pins with red line you show are the disable

Bottom two pins are enable so the two left pins are disable

Yes confirm working with jumper first and yes you have done the pins connections correct :) And no when you have the TF330 enabled with no HD you will get Black screen, this is normal

You are using a two way on/on switch ? which has three pins, so one way it will disable the TF330 and the other way it will boot to the CD32 splash screen with the TF330 disabled Also try spraying some contact cleaner into the switch and flick it a good few times as even from new these switches...