Kickstart 3.1 ROM chips for the Amiga 4000D

Printable View

Show 50 post(s) from this thread on one page

23rd October 2010, 20:16
rainbowat

Kickstart 3.1 ROM chips for the Amiga 4000D

Hi
I'm looking Kickstart 3.1 ROM chips for the Amiga 4000D v40.70 ROMs
thanx
23rd October 2010, 20:39
stachu100

V40.70 is for A4000T (tower) AFIK
23rd October 2010, 21:24
rainbowat

Well I'm looking for A4000D (desktop). :D
Thanks
24th October 2010, 01:25
rkauer

In fact you can use the 40.70 ROM from A4000T. All you need is to grab the Workbench.library and toss the archive on the LIBS: drawer. the SCSI controller will be not loaded as the expansion.library will not find it anywhere.

Most people use the 40.70 instead the 40.68 using this trick.
24th October 2010, 10:45
Elerion

Quote:

Originally Posted by rkauer

In fact you can use the 40.70 ROM from A4000T. All you need is to grab the Workbench.library and toss the archive on the LIBS: drawer. the SCSI controller will be not loaded as the expansion.library will not find it anywhere.

Most people use the 40.70 instead the 40.68 using this trick.

Cool trick! :)

But is there any noticable difference in 40.70 compared to 40.68?

E.
24th October 2010, 17:53
rkauer

40.70 lacks the workbench.library to make enough room for the 2nd.SCSI.device (the built-in SCSI controller).
26th October 2010, 21:11
rainbowat

Please close.
I found a ROM.
Thanx
26th October 2010, 21:13
Seaside

Quote:

Originally Posted by rkauer

In fact you can use the 40.70 ROM from A4000T. All you need is to grab the Workbench.library and toss the archive on the LIBS: drawer. the SCSI controller will be not loaded as the expansion.library will not find it anywhere.

Most people use the 40.70 instead the 40.68 using this trick.

Rogerio this trick works also in A1200's ?
26th October 2010, 21:41
AndyLandy

Quote:

Originally Posted by Seaside

Quote:

Originally Posted by rkauer

In fact you can use the 40.70 ROM from A4000T. All you need is to grab the Workbench.library and toss the archive on the LIBS: drawer. the SCSI controller will be not loaded as the expansion.library will not find it anywhere.

Most people use the 40.70 instead the 40.68 using this trick.

Rogerio this trick works also in A1200's ?

Not quite. The A1200 3.1 ROM contains a few other trinkets, such as the PCMCIA support. I don't think you'll have much joy using an A4000T ROM in an A1200.
26th October 2010, 21:55
Seaside

I was just curious Andy but thanks anyway for covering my question. :thumbsup:

Show 50 post(s) from this thread on one page