TF536: 030+64 MB+IDE internal expansion for the A500

Attachment 159878Attachment 159879
Working great on A2000 Rev4.1 after I installed MMUTools, IDE speed = 6,500,000. Purchased a TS4GDOM44H-S Transcend vertical 44Pin DOM which fits nicely under the drive rail for 12$ shipped and is working great. Edited S:WHDLoad.prefs and uncomment the MMU and NoAutoVec lines got the WHDLoad working well again. The A2286 Bridgeboard also is working without issues, I love this board, perfectly stable and fast...highly recommended. Now I can remove my old A2630, A2052 memory board and Buddha cards. Is there a way to solder a header onto the board for a hard drive activity LED? Thanks.

Quote:

---

Originally Posted by Bit-Image

Is there a way to solder a header onto the board for a hard drive activity LED? Thanks.

---

There is no LED header on the board.

Board shipped to ElAhrairah

Some people had doubts that the board can fit together with the Indivision ECS, so I added a photo to the first post showing that they both fit fine without issues.

Quick delivery time to Europe (6 days). Card received and is operating excellent. Connected to an A2K rev 4.3. Rom 3.1 via a co-proccesor card, Buddha IDE 120GB SSD, and 2MB megachip PLCC (tuxbars). Classic WB. Whdload games work excellent. Mmu libs installed and fastrom is operating excellent. Significant speed increase, WB starts up in no time, operation is smooth. Not one crash thus far. Very content and I wish this card was available sooner. For an A2K owner who wants an affordable speed increase while maintaining the soul of the system this card seems to be the correct choice.

hello
i m interested in one board+relocator for amiga 500 (160$)
i ll send pm
payement sent

Hello,

quickly received to France after only 4 days ! Very happy with the device for my amiga 2000 rev 6.2. As I had just recapped two week ago, I had to replace the front keyboard cap ( pins too short to bend ) just to have it another lying on the board, and to bend the 47µF at the botton of the processor. I have add two rubber one KS chip in order to keep the card horizontaly. Works perfectly

I am following your advice in order to add mmu drivers and fast rom.

I have a GVP HC+8 (8Mo + SCSI), I am not sure that it is a godd idea to keep a SCSI HDD when I see the ide performance ! May you give me some advices.

Very very good quality ! This is a top choice for an Amiga 2000.

thx
bye

Shipped to yanlt65 and Mycohl.

benur75, you may as well remove the SCSI controller, but up to you. If it works, you can keep it and use the IDE as the boot disk since it will be faster.

Hallo

I'm interested in a TF536 for my A2000

Shipped to Bmrsred

hello i receive it today
Very good quality

i ll try it on my next hollidays :) no time before
thank you