Interested in accelerator and relocator for A500. Do you have a mega-chip friendly relocator?
Printable View
Interested in accelerator and relocator for A500. Do you have a mega-chip friendly relocator?
I only have one type of relocator now, and I have no idea how this affects the mega chip. How tall does it sit? There is not a lot of clearance between the Agnus and the relocator right now.Quote:
Originally Posted by a500guy
you can 2 or 3 or 5 Precision Sockets add to the tf536 cardQuote:
Originally Posted by a500guy
Interested in the accelerator for A500 and no relocator.
sending PM
Thanks
Shipped to a500guy. Thank you!
I got a payment from knoid but no address to send to! Please send me your address. Thanks!
expressing interest.
expressing interest for the TF536 card + A500 relocator
Shipped to endsjustify and spACEj
For the ide led, here is what I did:
at the end of the ide ribbon, I have a ide 2 cf adapter (44 pins), which has no ide pins or ide leds. So on the back side of the adapter, I needed VCC (+5V ) and the ide activity signal (- variable Gnd).
I addded a 1kohm resistor at the VCC output to reduce power.
Using this 2 new wires from ide2cf aadapter, I connect the green led of my A2000(previsouly connected to GVP SCSI) to these news wires. It works perfectly, But if you prefer, you can keep green led on scsi and use red power ligh for Ide.
bye