Printable View
5x Satandisk for sale, 45 pound each, postage 2,99 in UK, 5.99 Europe, 7.99 rest of world. Recorded Royal Mail.
Set included:
Satandisk and cable with DB19 plug. Sorry ,no power supply but you can use any beetwen 7-12 volt. For example from ZX Spectrum or universal.
New, assembled by me.
I might be wrong but the ZX Spetrum psu idea is not very good as i recall the psu as the plug polarity reversed (positive on the outside negative in the inside).
On board Satandisk is bridge rectifier and convert polarity .
Hi - is this the Ultra model, or standard? :thumbsup:
standart, Ultrasatan is in second topic i made it also.
Hi! does it come with a plastic case?
thanks
No, only board and cable for ASCII port.
Bump and discount, 35 pound each.
Hey - I would like one for that price but would like to known exactly what power supply I need and memory card.
INTEREST SHOWN :thumbsup:
Thanks :)
About power supply, is very elastic device. Any power supply who can give 7-12 volt, 300mA or more. For example http://www.maplin.co.uk/ac-dc-multi-...wer-supply-226 .
About memory card, 1-2 gig cf not SDHC,
Of course i can add 2 gig memory card with partitions and some software for extra 6 pound.
Hi! I'm interested on one satandisk. How I can pay?
Thanks!
Bank transfer , moneybookers.com , googlecheckout.
Do you accept Paypal?
Sorry but no more Paypal. Simply bank transfer to my UK Natwest account?
Sorry, interest withdraw, by now i only can pay with paypal.
Interest declared!
Sending PM.
Pity no PayPal. :(
But i accept moneybookers.com.Cheaper and better for crazy paypal. But i'm not sure how it works in Australia.
interest declared
Posted today to Lorez. Feedback left.
Final reduction ,3 left, 25 pound each.
Interest declared. PM sent.
Interested in one - PM sent
Yes please, PM sent
Payment Sent
Payment sent
Payments recived, all sold! Next bath is in progress .
Hi there,
Disappointing as I showed interest - can you let me know when the next batch is ready and I will pay immediately.
Thanks,
John :thumbsup:
Interested, if any left. PM sent.
Indeed, this is poor show. Zaxon, please can you tell us what happened here?Quote:
Originally Posted by johnali3n
Thanks.
All ok, johnali3n order it on other forum and use other nickname,we took about it and now all is clear,payment recived.
All has been sorted out - slight confusion over nicknames! :bowdown:
Ok, last one sold for abraXXious, payment pending.
How it is made?
Thgill again change mind, so one more is free to sell. Rest is packed and ready to post in saturday-monday. I send confirmation and tracking numner for all on PM.
Withdrawn interest, sorry Zaxon.
Funds cleared into Moneybookers account. Payment made.
All payments recived, postage in monday-tuesday morning.
Arrived safely - am eagerly watching to see what other gems you will be producing. :thumbsup:
Feedback Left.
Fantastic, thank you - I have used it already and it works brilliantly! :thumbsup:
---------- Post added at 22:50 ---------- Previous post was at 22:27 ----------
I am not sure what is going on but in my impatience, I have to ask here just in case anyone else has the same issue and I am doing something stupid.
My SatanDisk worked beautiful, however did not work the first time I connected it. I reset, and it worked a treat.
Now it doesn't work at all :( The Atari won't pick it up. The RED and GREEN lights are constantly on whereas before the GREEN light would only show if there was card i/o.
Anyone got any ideas what I am doing wrong?
I GOT IT WORKING by following ZAXON's instructions, thank you. In case anyone else has the same problem:-
"Hello, swith off atari, insert card, connect satan disk, power on satan disk first , switch on atari."
:thumbsup:
Hi! Try to switch off your atari and your satandisk, then, switch on satandisk and next your atari, in this order (with sd inserted, of course).Quote:
Originally Posted by johnali3n
Sometimes, if you get off sd card while satan is powered (not working, but powered) could happen that. I hope this can help you!
Sorry for my english :oops:
:beer:
---------- Post added at 22:50 ---------- Previous post was at 22:27 ----------
Hey! someone passed me
Great! Thanks for the info.
How can I read the card on my PC and/or MAC so I can start transferring files to my beloved Atari?? :)
Take a look at this link http://atari.8bitchip.info/DiskImgPP1.htmlQuote:
Originally Posted by johnali3n
Ready to use flash card images, usually with 2 or 4 partitions, and first partition is fat, it means that 1st partition can be read on a PC or MAC...
Hmm, netusbee is good idea :roll:, FTP on pc, atari coneccted to net and life i simply.
Hi zaxxon, maybe I could want one... (really, I need one) :unsure:Quote:
Originally Posted by zaxon
do you have any netusbee for sale?
Yes, i assembly it today.
How much will the netusbee cost?
I looked at http://atari.8bitchip.info/DiskImgPP1.html but there arn't any instructions on how to get the image on to your CR card. Oh sorry, there is apparently but it doesn't help me :(
Hard disk image file
for usage with Atari ST(E) computers
or Atari emulators.
Main image is with ACSI autoboot
driver. So, will boot on any Atari ST(E)
machine equipped with some hard disk
attached onto ACSI port via adapter.
And with Satandisk, Ultrasatan too.
If have IDE hard disk or CF card on IDE
port still may autoboot, only needs to over-
write disk begin with suplied 1GB_IDE.IMG.
PP. March 2010
is simply, download USB image tool, from here: http://www.alexpage.de
download image card
run usb image tool, change volume mode to device mode, click on icon under, and click on restore, choose downloaded img file, USB tool write your card, later insert it in satandisk.
OK, thank you. I am on my MAC now, so will tackle this at the weekend.
I thought it would be easy to transfer files from my PC to the Atari using the SatanDisk - obviously not :(
I have entered a whole new world of Atari Hard Drive emulation and hacking it seems :bowdown: