Viper630 (E-Matrix) 4MB version

Hello everyone. I have purchased an ACA630 and as per my wife's request, I am selling my viper630. I will add pictures later this evening, but here is what I know about this piece of hardware.

This model is the E-Matrix 630 version
It has 4MB of RAM soldered to the board. I am uncertain as to if you could flesh it out with the other 4MB, sorry.
The board does not have an FPU. I never saw a need for it on my A600
When I bought my A600 it had this inside. This machine had sat in a closet at Ed's for about 6 years, and it had been unused. Cosmetically the card looks okay, I guess.
Someone had added rubber feet to help keep it mounted on the board. I do not know if this is problematic, but I will leave them on and if someone wants the card they can remove them as I am certain all I would do is damage the board.
The 68030 is clocked at 40 MHz and is rated at 1.37 the speed of an A3000D with 6.66Mips (funny right?)
I have the screws that allow you to mount a hard drive over the top of the card and they will go with this card. I had no software with this accelerator though, otherwise I would ship that as well.

So, with great hesitation I release this card for sale to the good members of Amibay. Asking price is 150 USD plus shipping. Due to the weight shipping shouldn't be too much more than 25 USD more for most places in the world. Please take a look and have a wonderful day/evening.

Thank you,

Nathan

Nathan can you give a shipping quote to Greece please as i'm interested on this ? With Priority Mail (Registered) and with Express Mail.

I'm also interested, second in line.

I will do so. Let me find out for you and I will get back to you.

Marvellous - fingers crossed that your patience has paid off here, Seaside :thumbsup:

Wow! I haven't shipped anything in a while. The prices have skyrocketed! Priority Shipping to Greece at 2 pounds (which is what they'll want to charge for this. Over a pound, but under two.) is 32.40 USD. Making it registered adds 11.50 to that making it 43.90 USD via Priority. Express mail base cost would be 39.50 USD. Insuring for 200 USD on the Express would add a dollar, but on priority it adds 4.50! I wish they still had air ground shipping through UPS and the like. It couldn't be more expensive than this.

Edit - Shipping to the Netherlands is almost exactly the same. Priority is 32.30, and Express is 39.45

Quote:

---

Originally Posted by chiark

Marvellous - fingers crossed that your patience has paid off here, Seaside :thumbsup:

---

We have to talk. In friendly tones of course.:shhh::shhh::shhh::shhh::shhh:

---------- Post added at 20:41 ---------- Previous post was at 20:39 ----------

Quote:

---

Originally Posted by Nathanieltolbert

Wow! I haven't shipped anything in a while. The prices have skyrocketed! Priority Shipping to Greece at 2 pounds (which is what they'll want to charge for this. Over a pound, but under two.) is 32.40 USD. Making it registered adds 11.50 to that making it 43.90 USD via Priority. Express mail base cost would be 39.50 USD. Insuring for 200 USD on the Express would add a dollar, but on priority it adds 4.50! I wish they still had air ground shipping through UPS and the like. It couldn't be more expensive than this.

Edit - Shipping to the Netherlands is almost exactly the same. Priority is 32.30, and Express is 39.45

---

OK tell me the total for the 2 options.

A)Priority - Insured - Registered
B)Express - Insured - Registered

I might be able to ship it in a small flat rate box for 13.95 USD I would need to pack that puppy full of bubblewrap but I think it would fit. It is up to the interested parties to let me know how they want it shipped. I think with the flat rate I cannot insure it for for than 100 or so as well.

-Edit-

A) 32.40 + 4.50 + 11.50 = 48.40 USD
B) 39.50 + 1.00 + 11.50 = 52.00 USD
or as above in the small flat rate box (if it fits. I haven't measured the a small box)
C) 13.95 + 11.50 = 25.45 USD (that is assuming that it fits in the box.)

The smallest box you have there is the "Small Flat Rate Box"

I do not think it will fit inside. And if will fit it will come damaged.

The C) option you mentioned i assume it's not registered and not insured. If you have patience and time to check i can wait.

AND please check the point circled in the photo. This leg is broken or just bent ?

The option c is the flat pack box. With the amount of packing material I want to use it will not fit. I have a box here that I had filled with packing material that worked, and I based my shipping weight off of. I would prefer shipping method 1, and if I can save any costs on shipping, those will be passed back to you.