CF-IDE ADAPTER + POWERSUPPLY cable
3.5' IDE to COMPACT FLASH Card ADAPTER
Brand New - NEUF
Description: 40-pin IDE to CompactFlash Card IDE Adapter
Format: 3.5'' IDE female verticale connector - CF male connector.
-> Power supply cable (see picture below) included in this lot: 1x MOLEX 4-Pin power supply connector (male) to 1x Berg 4-pin connectors (female) mini-Molex (or floppy power supply).
-> CompactFlash card is not included in this lot.
PRICE: 4.50 EUR / unit (including P&P economic mode (except France & exotic countries/Islands/Iceland: please ask me!)
Unit available: 5 (2 units=psodas)(3 units=Skyrunner) No more unit available. SOLD
- Delay in economic mode: 5/10/25+ working days (depends)
- Delivery: in robust&indestructible :smile: pack - for worldwide.
- Shipment with insured+tracked: ask me.
Sold as it is - No warranty - No refund - No return.
Payment: PAYPAL as Gift or buyer pay all fees.
For:
- AMIGA A3000 (T), AMIGA A500 (T), AMIGA A2000 (T) => with IDE card ;
- AMIGA 4000 (T), A1200 Tower or A1200 with external IDE card;
- AMIGA A600 Tower;
It can't be installed directly on IDE internal A600/A1200 connector because it's vertically (and it's not the same connector: here 3.5" not 2.5"). It can be installed inside all AMIGA with an additional IDE card (internal or external) not included here.
- support 8GB - 16GB - 34GB - 64GB.
- 50-Pin standard compact flash socket.
- +5 V floppy disk drive power connector.
- Master or slave mode selection by jumper.
- Compatible with Compact Flash Type I, Type II, and support IBM Micro-drive with CF-II interface.
- Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.
- Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP, Vista, Unix, Linux .
http://img262.imageshack.us/img262/5...c09712x.th.jpghttp://img819.imageshack.us/img819/5...c09713b.th.jpghttp://img155.imageshack.us/img155/4...c09714c.th.jpg
http://img690.imageshack.us/img690/8...c09715u.th.jpghttp://img208.imageshack.us/img208/9...c09716g.th.jpghttp://img148.imageshack.us/img148/9250/dsc09717.th.jpg
http://img12.imageshack.us/img12/7172/dsc09718y.th.jpghttp://img213.imageshack.us/img213/1...c09719f.th.jpghttp://img717.imageshack.us/img717/4...c09720r.th.jpg
http://img89.imageshack.us/img89/2027/dsc09721.th.jpghttp://img217.imageshack.us/img217/9...c09722s.th.jpghttp://img231.imageshack.us/img231/7...09724jg.th.jpg
Please use specific tools and all protections against ESD!!!
REMEMBER ALWAYS TO DISCONNECT ALL POWER CABLES BEFORE OPENING UP THE MACHINE!!!!! REMEMBER TO WORK IN A STATIC-FREE ENVIRONMENT, GROUNDING YOURSELF BY CONNECTING A WIRE FROM YOURSELF TO A NEARBY GROUND!!
