MiniMig ARM controller plus "extras"

Yet more consolidation victims... :)

This time I've got a MiniMig v1.1 ARM controller for sale, along with an attached semi-functioning standard Acube 2MB MiniMig v1.1 board. This comes with the following:

• Brand new MiniMig ARM controller

• Boxed with instructions, cased (it's the "Amiga" etched open sided Plexiglass top/bottom one) Minimig v1.1. <* see below>
• Orginal PIC controller for the Minimig.
• Minimig SCART to VGA cable (from Amigakit)
• 5v PSU for the Minimig
• 512MB SD Card for the Minimig.

http://www.digitalphage.com/images/a...0131-eMail.jpg

http://www.digitalphage.com/images/a...0131-eMail.jpg

* I can't get the Minimig to load ADFs, I had thought it was the PIC controller so I got an ARM controller only to find that it wasn't the cause.. hence the sale. So this sale is for the ARM controller + "stuff". Treat the Minimig as dead.

That said, it does boot up and load the kickstart(s) etc, I just can't get it to load ADFs. See below for a dump off the serial line when it's booting up and running a two ADFs.

But again, I'd like to emphasise that the sale here is for the ARM controller + "extras". I can't describe the Minimig as working, so please bear that in mind. :)

Price: I'm looking for around £90 + postage. PayPal (buyer pays fees of 3.4%) or bank transfer.

Code:

---

Minimig by Dennis van Weeren
ARM Controller by Jakub Bednarski

Version AYQ100818

SD card detected
spiclk: 8 MHz
partition type: 0x06 (FAT16)
fat_size: 62
fat_number: 2
fat_start: 237
root_directory_start: 361
dir_entries: 512
data_start: 393
cluster_size: 64
cluster_mask: FFFFFFC0
FPGA init is high
file "MINIMIG1BIN" found
FPGA bitstream file opened
[****************************************************]
FPGA bitstream loaded
FPGA configured in 1010 ms
file "MINIMIG CFG" found
Configuration file size: 100
file "KICK    ROM" found
uploading ROM file...
[****************************************************************]
ROM file uploaded.
file "HARDFILEHDF" not found
Bootloading is complete.
Inserting floppy: "WB13    ADF"
file attributes: 0x20
file size: 901120 (880 KB)
drive tracks: 160
drive status: 0x11
Inserting floppy: "ShermanM4"
file attributes: 0x20
file size: 901120 (880 KB)
drive tracks: 160
drive status: 0x11
file "KICK13  ROM" found
uploading ROM file...
[****************************************************************]
ROM file uploaded.

---

But the minimig is also included, right? :roll:

Is it the 2Mb or the 4MB ram version?

How much for shipping to Italy?

Actually I am not interested, but maybe...

Kyle - yes the (not working 100%) Minimig is included (ARM + Minimig + case + PSU + SCART + box/instructions + 512MB SD card).

I was thinking that someone who wanted the ARM controller would be the target audience as that's new.

Yes it's the 2MB version (I'll update the first post).

Shipping to Italy would be dependant on interest, but maybe... ;)

Hi, I want to show my interest.
How much is shipping to Germany?

Greetings
zErec

Quote:

---

Originally Posted by zerec

Hi, I want to show my interest.
How much is shipping to Germany?

Greetings
zErec

---

Boxed and packed it weighs about 1.1KG. Getting quotes from http://www.interparcel.com/ I'm seeing prices of around UK£17.00 + VAT (20%) so about £20.40 to ship to Germany. That's without insurance.

Just to be clear - you realise that I couldn't get the Minimig to work? :unsure:

Did this sell?

Nope still available. :)

So what would the price be all up to send it to New Zealand?

Using the weight I gave above 1.1Kg and Royal Mail price finder
http://sg.royalmail.com/portal/rm/PriceFinder prices range from £7.65 to £23. Depending on speed etc. This would be without insurance.

Couriers would be more (as you'd expect). You can price these yourself given that you know the weight of the stuff (1.1Kg) and where I am (Glasgow) and OFC you know your place :)

But - as you're a fellow Kiwi (I'm a Waikato lad myself) I can also offer a "zero cost" shipping option! As it happens my mother in law is coming to visit from NZ (my wife's also a Kiwi - we're everywhere!) and I can get her to bring it back to Aotearoa for you (she can post it to you from there). Only down side of that (for all of us! ;) ) is that she's here until March 31st.

LOL, who would've known another kiwi :) I relate to the mother in law, they have there moments ;)

Do you know if it will read an HDF file? I'm hoping it's fixable, was having a read through a couple of forums but have confused myself more than anything.

Has it ever worked, with regards to adf's?