Derringer 030 50 MHz for Amiga 500 / 2000

up for sale is a Derringer 030 50 MHz accelerator board for Amiga 500 / 2000. comes fully tested and working, with 16 mb RAM installed.

for more info check here :

http://amiga.resource.cx/exp/derringer

the RAM is not autoconfig, you need to run a program at startup for the RAM to be visible. I include a floppy which includes the necessary software.

A full 50 Mz 68030 CPU and 50 Mz 68882 is installed on the unit.

I throw in a individual clockport adapter for 15 Euro extra (will give you two clock ports)

https://lh5.googleusercontent.com/_q...2/PIC_2167.JPG

https://lh5.googleusercontent.com/_q...2/PIC_2171.JPG

https://lh4.googleusercontent.com/_q...2/PIC_2165.JPG

https://lh5.googleusercontent.com/_q...2/PIC_2149.JPG


check for more pictures here,

https://picasaweb.google.com/coze.00/Derringer030#

asking for 270 Euros, ALL INCLUSIVE.

Some information and terms about my sales,

1 - PLEASE DONT ASK FOR SHIPPING. My prices are ALL inclusive (paypal, shipping whatever)
2 - PLEASE CONTACT ME IN THREE DAYS OF INTEREST DECLARATION. IF you dont contact me I reserve all the rights to negotiate with other parties.
3 - PLEASE BE READY TO PAY IN ONE WEEK WHILE DECLARING INTEREST. I may agree to a delayed payment, but you must contact me and get my approval, and keep communication up.
4 - All my sales ship with EMS (unless otherwise noted), a trackable, insured premium service that I never had any problem with. :thumbsup:

Hi coze.
Does the clockport adapter work with the Derringer?
Is it still possible to keep the upper shield and close the case with both plugged on the CPU socket?

!!!!

Quote:

---

Originally Posted by Xanxi

Hi coze.
Does the clockport adapter work with the Derringer?

---

Yes.

Quote:

---

Is it still possible to keep the upper shield and close the case with both plugged on the CPU socket?

---

The upper metal shield must be cut to allow the accelerator to fit. Better simply remove it.

Quote:

---

Originally Posted by Xanxi

Hi coze.
Does the clockport adapter work with the Derringer?
Is it still possible to keep the upper shield and close the case with both plugged on the CPU socket?

---

The my friend Rogerio explained, you need to remove the RF shield, definitely, even with only derringer. (or you need to cut a very big part, more than half)

One more thing, the case wont close wit both plugged in to the CPU socket. You need to find some creative ideas to close the case, if you want them both (removing CPU socket and soldering the clockport adapter directly to the mobo, dremeling the part of keyboard which touches the derringer, etc) I think about 5-6 mm clearance could make it work. I will try to add the pictures if there is interest.

btw, price updated.

coze whats up bro , from Turkey Doruk :)

coze çok güzel kartmış çeşke kutuya onuda ekleseymişsin, good luck

@Ozkano: English only, please.

ok guys the FINAL PRICEDOWN !

I'll haul this over at the bay next week, so grab it if you want it.

The final price doesnt include the clockport adapter anymore.

Interest declared for the platinum version of this card 50 MHz.

PM sent

Regards