Printable View
*AMD Athlon X2 BE-2350 Processor (64-bit dual core @ 2.1ghz for motherboard socket AM2/AM2+) = £SOLD
* 2gb (2 x 1GB) dual channel DDR2 PC5300 667mhz SODIMM's for laptops = Now listed on ebay: http://cgi.ebay.co.uk/2GB-DDR2-667-L...item27b9eda222
*Hitachi/LG high speed, dual layer DVDRW/CDRW combo drive (SATA) = £SOLD
All items are in excellent condition and perfect working order :)
Where is the mini itx psu for sale? If you sell it, let me know:)
I've sent you a PM :)Quote:
Originally Posted by jvdbossc
It's a lenovo external PSU rated at 130W, 19.5V and 6.66A... The part/model number is "42T5279". The PSU brick itself is a bit bigger than a typical laptop AC adapter and plugged into the PC using a barrel-type connector (like most laptops).
I was thinking it was mini itx, anyhow this could be of use for another project, since my psu for lenovo laptop are 4 amps not 6.
I got an offer pm replied.
I hope I stayed within forum rules, but the thread where it was mentioned that the pc would be split was closed, and this thread did not mention a psu nor casing. :lol: You never know it sells mate...
Where is the 19 volt taken down for the mobo do you know or have that part as wel...
Declairing interest in the CPU and the optical drive, sending PM:thumbsup:Quote:
Originally Posted by Powerpie5000
---------- Post added at 18:03 ---------- Previous post was at 17:22 ----------
Payment sent:thumbsup:
I don't have the motherboard anymore but it had a small socket onboard for the PSU plug (barrel-type) similar to most laptops... The Lenovo AC adapter is basically a slightly larger (and heavier) version of a typical laptop AC adapter except it's rated at 130W, 19.5V and 6.6A. Thats pretty much all i know about it.Quote:
Originally Posted by jvdbossc
@Tajmaster
Payment recived and your items will be posted out tomorrow.
Cheers :thumbsup:
I don't have the motherboard anymore
A shame was going to ask to cut the connector out:) You know for pieces like that you can just use a flame thrower from campingaz and parts fall off;)
I will see if the board is still in my office bin... If it's still there do you want any other bits off it?Quote:
Originally Posted by jvdbossc
If it is still there just the connector, you can use just a cuttur, I will desolder it myself. Ps use glasses or shut your eyes wile cutting in the pcb.
It's in an awkward place to cut so i've desolderd it for you. I'll put it in with your PSU and post it tomorrow (thanks for the payment - you just need to remind me of your postal address ;)).Quote:
Originally Posted by jvdbossc
:cool: