Blizzard 1260 060@80MHz 64MB RAM

As in title, including selected 50ns 64MB SIMM capable to work @80MHz.
Card fits into standard A1200 desktop case without any problem.
Oscillator is socketed, so no problem with frequency change.

With 060@80MHz card reached 104MIPS! :D

Please be aware that SCSI KIT will refuse to work with 70MHz and higher.
So if you plan to use SCSI KIT I will add 66MHz or 60MHz oscillator (up to you).

060 cooling is a must if card will work with frequency higher than 66MHz. There is a possibility to switch-off fan by removing red jumper if frequency will be 66MHz or lower.

Card in perfect visual and technical condition.

You will get:
1) Blizzard 1260 with 80MHz oscillator installed
2) 66MHz or 60MHz oscillator for free
3) User Manual
4) Original box

Asking 345EUR including insured and tracked shipment to EU. Shipment to other countries possible, please ask for extra postage fee. Will not be high though.

Payment by PayPal with option "gift".

Video:
http://www.youtube.com/watch?v=X6dcKw3qiTE

Photos:
https://picasaweb.google.com/stacho1...64MBRAMForSale

Have a question - please PM me.

New price: 345EUR including postage.

Good luck with the sale my friend. This is a true beast! If I didn't have (an upgraded by you) BPPC, I would have taken this in a heartbeat :)

Hi, will it fit in a desktop A1200? With a slower crystal, of course. If yes, I might be interested.

Quote:

---

Originally Posted by koshman

Hi, will it fit in a desktop A1200? With a slower crystal, of course. If yes, I might be interested.

---

Hi, Since Stan isn't about...

That will fit just fine and even if you run it at 80mhz it will be fine with the fan to cool it :thumbsup:

Its only if you want to run the SCSI Kit (or without extra cooling) you need to use a slower setting.

Also, with a large Simm like shown you *may* not be able to fit the trapdoor, I'm sure you'd be able to though with a slim 32/64mb Simm.

All the best.

Steve.

64MB of 50ns RAM module working @80MHz is included. Should be enough for normal use. ;-)
And yes, this card will fit into standard desktop case with trapdoor closed. No need to use extra standofs or stuff like that.
If you would like to use with SCSI kit you will be forced to install 66MHz oscillator and to remove fan (it's glued by soft glue to easy removal).

Thank you both. OK then, PM sent.

And PM replied. :-)

Payment sent.

Payment received, thanks!
I will post it tomorrow.