CF to IDE Extender, A600 and A1200

Hi All,

I have CF to IDE extenders for sale that i have built, below is the address for the little video.

It is designed so you can swap out your CF cards without the need for opening up your A600 or A1200 case. It also removes the 15 second wait time if you are using KS3.1 and don't have a CF card installed.

I have made 60 and am down to about 15 left, dependent on interest i may make more. price is $18 Cdn plus shipping (~$8.50 air) all orders accepted are based on time received if i run out.

http://kipper2k.com/cfextender/CF%20Extender.html

Items will be ready for shipping ~ Fri 25th March 2011

Thanks

I guess you tested it did hit the normal hd speed :) Is this aca630 compatible? If so put my name down for one. If I change my mind I put it in my a1200. I think hotglue and ribbon cable could do the trick but I like neat stuff like this better :thumbsup::thumbsup::thumbsup:

Quote:

---

Originally Posted by jvdbossc

I guess you tested it did hit the normal hd speed :) Is this aca630 compatible? If so put my name down for one. If I change my mind I put it in my a1200. I think hotglue and ribbon cable could do the trick but I like neat stuff like this better :thumbsup::thumbsup::thumbsup:

---

Hi,

I tried it with the ACA630/56 and i also tried it with the ACa1230, no problems at all. It doesnt get in the way of the ACA630 either.


I'll keep you informed. thanks for the interest :)

Hi.
Interested in at least one, and if possible two of them.
Do they need to cut the case to fit?
Thanks.

Declaring interest in one unit and can join in on fitzsteve's group buy. PM sent.

Quote:

---

Originally Posted by Xanxi

Do they need to cut the case to fit?
Thanks.

---

Hi!

You need to extend the PCMCIA slot upwards, with a set of small files you can make it look very profesional :)

Steve.

I have created a couple of photos and PDFs for installation help, and also some cutout templates to assist in cutting the case. If you have a dremel and aren't hung over :) you should do fine.


(i'll post links to them once i tidy them up)

Awaiting links......

Thanks.

As promised here is the installation and other info for the Adapter


http://www.kipper2k.com/cfextender/CFguide.pdf

http://www.kipper2k.com/cfextender/cftemplateA600.pdf

http://www.kipper2k.com/cfextender/cftemplateA1200.pdf


make sure you print the templates as full size to ensure it doesn't scale the template to a different size

Hello kipper2k,

? Is it about 18€ incl. shipping? Also to The Netherlands? Can I pay with PayPal?

Nice job btw!