Retr0bright Support Thread

@ Khondar

Was the colour of the paint you used actually Ford Sahara Beige? If not, what is the exact shade of paint you bought (car model and name of colour)?

My Dad had a Ford Escort in Sahara Beige back in the late '70s. I remember the colour well and it was my best guess as to the closest match to A500 plastics, as they would have been originally moulded. I'm interested to find out how close my guess was.

We know that Austin Rover Old English White is the best match to A1200 / A600 plastics so this information would be really useful for a FAQ.

Nice paint job, by the way!! :bowdown:

Thanks

@ taj,
I found the cream peroxide loads easier to work with and I have some knocking about still if you wish to pick it up.

Quote:

---

Originally Posted by Merlin

@ Khondar

Was the colour of the paint you used actually Ford Sahara Beige? If not, what is the exact shade of paint you bought (car model and name of colour)?

---

You can see the acryllic spray paint in my picture - "Dupli Color - Auto Color". The name of the color doesn't show anywhere... it was simply shown by the color of the cap. After spraying 2 layers you cannot see the difference between the inside/backside of the top cover (which never had any yellowing) and the top side. It looks like new. Of course I started with a primer for plastics (also seen on my pic), then 2 thin layers of paint, followed by 2 thin layers of transparent acryllic varnish. Had I not scrubbed the surface too hard, it would also feel like just out of the box. Now its a bit rough, but I actually like it. Once the keys are finished (takes forever!) I will put up a pic of the final and complete unit.

I will also check the bottle for any article number and let you know.

Quote:

---

Originally Posted by clueless

@ taj,
I found the cream peroxide loads easier to work with and I have some knocking about still if you wish to pick it up.

---

Thanks for the offer Craig :) But I decided to take the plunge and give it a go, the mixture came up pasty enough to cover an A1200 casing....then the bloody sun went in :censored::censored::censored: Anyway.. Its been outside since about 4pm and I took "before" pics so we will see :) If its sunnier tomorrow Ill just use whats left of the mixture to give it another go :thumbsup:

Thanks Khondar. There may be an inkjet code on the domed bottom of the can; if there is, please post it and I'll find out which one it it.

:thumbsup:

I got some retrobrite on my thumb and finger, its left a white mark like super glue sometimes leaves but the one on my thumb is stinging :help: I tried to wash it off with soap but it doesnt wanna come off even if I scrub it. How can I get this blotch off my skin? :blink::blink:

BTW, Ill post before and after pics of the GVP HD8+ and the A1200 casing I have put the retrobrite on :thumbsup: Weve got lovley strong and bright sunshine here in Bradford today and the cases already look better after almost 4 hours :D

So who was it on Rock Radio (Manchester) talking about Retr0-bright then?

That was me on 106.1 Rock Radio (is there any other radio station?), although Steve Berry didn't seem to be that interested to be honest...it all got rushed as they were pushed for time... :(

@ Taj

Leave the blotch alone - the peroxide has bleached your skin. As hydrogen peroxide is so closely related to water, it can easily penetrate layers of skin and burn them from below the surface; this is why we warn people to wear gloves - you did wear gloves, didn't you....?? :wooha:

The blotch will fade over the next couple of days. If you have any baking soda handy, it may help soothe the stinging if you put your thumb into a dilute solution of baking soda.

Thanks Merlin :thumbsup: Yeah I wore gloves but like an idiot I forgot to put them on when re-applying some of the paste after it had dried.

I can see the results already, the A1200 case looks totally different although there is still some slight yellowing (its still in the sun though). The GVP hard drive casing looks brilliant! Ill upload pics once they are all ready :) Thanks again Merlin and thanks for making this stuff so our old skool hardware can be its rightful colour :thumbsup:

Quote:

---

Originally Posted by Merlin

Thanks Khondar. There may be an inkjet code on the domed bottom of the can; if there is, please post it and I'll find out which one it it.

:thumbsup:

---

Hi Merlin. Here are the pics with the article code of the spray paint. Code is on top of the cap.

@ Tajmaster

Welcome to the club. I don't think there is any serious Retr0bright-Master without peroxide stains on their fingers ;) Its nasty stuff - and just as you think you have the routing and know what you're doing, it still gets to you. ALWAYS wear gloves and safety glasses :ninja:


Khondar, who is still waiting for the bloody keys to be clean....