Printable View
For sale is a unfortunatly faulty CS MK1. The accelerator runs perfect but only without RAM. When you install more than 4MB, Workbench crashes when using the RAM from the Cyberstorm...
The 68060 is brandnew with latest chip revision, installed last week.
Comes with 64MB RAM, this RAM works in my other CS MK1 perfect..
Price: 160 + shipping
Are you sure it's the ram and not the ram module? Try the ram module from the other MK1. I finally settled on 16+8+4+4 since none of my 32MB modules would work on it. They did on my other blizzard 030/040 cards but just not on that there I like to call beast of a CS MK-IQuote:
Originally Posted by spock-79
I also noticed that fitting it might be a bit of a hit and run (the ram module) since the board bents quite a bit even under gentle pressure I needed 2-3 tries to try out other ram configs. Not something easly done in a A4000D
Quote:
Originally Posted by MisserAre you sure it's the ram and not the ram module? Try the ram module from the other MK1. I finally settled on 16+8+4+4 since none of my 32MB modules would work on it. They did on my other blizzard 030/040 cards but just not on that there I like to call beast of a CS MK-IQuote:
Originally Posted by spock-79
I also noticed that fitting it might be a bit of a hit and run (the ram module) since the board bents quite a bit even under gentle pressure I needed 2-3 tries to try out other ram configs. Not something easly done in a A4000D
I really donīt know where the fault is located... The other RAM Module brings the same fault on this CS. And the RAM Module from this CS works great in my other CS MK1, i think the fault is somewhere on the carrierboard...
Ah can't help you there, but it might be some internal stress due to fitting and refitting. Mine does bend about 3-4mm while attaching the ram module using baby bottum touch pressure.Quote:
Originally Posted by spock-79Quote:
Originally Posted by MisserAre you sure it's the ram and not the ram module? Try the ram module from the other MK1. I finally settled on 16+8+4+4 since none of my 32MB modules would work on it. They did on my other blizzard 030/040 cards but just not on that there I like to call beast of a CS MK-IQuote:
Originally Posted by spock-79
I also noticed that fitting it might be a bit of a hit and run (the ram module) since the board bents quite a bit even under gentle pressure I needed 2-3 tries to try out other ram configs. Not something easly done in a A4000D
I really donīt know where the fault is located... The other RAM Module brings the same fault on this CS. And the RAM Module from this CS works great in my other CS MK1, i think the fault is somerwhere on the carrierboard...
HI buddy I am interested
I seems like a cracked solder joint in the CS pins. A simple solder re-flux will cure it.
Offer made and pm done
Quote:
Originally Posted by rkauer
A simple?!?! that sounds a bit like taking a paintstripper to a 'fubar' xbox 360 to re-flux the cpu? It did work h..l yeah it worked darn bugger never rrod on me again. Owh yes it actually does play games still.
Second if cugar124 donīt get it.
Best Regards
Pedro
Hi Spock,
I am interessted too. Do you also have a fitting SCSI module?
Best regards
FD