Printable View
Hi to all :)
Recently I adquired some hw for my A4KD's and some doubths come...
What's the best combination for RTG & Warp3D compatibility? And for dual system 3.x & 4.1 Classic?
1.- Voodoo3 300 & Radeon 9200 256MB
or
2.- CybervisionPPC & Radeon 9200 256MB
Thanks
AFAIK you cannot run two different PCI Graphics Cards with OS4.1 so a dual boot system with Radeon and Voodoo wouldn't work.
I still think the Voodoo 3 is the best Warp3D option however BVision or CVision in your case also work very well and I uderstand you can have a Bvision and Radeon at the same time without issue in OS4.1 so I think this maybe is your best option for a Dual Boot setup.
Steve.
I think Steve is right on this but better for DarrenHD to provide more feedback on this.
Every card has it's pros and cons so I kinda understand Pablo's questioning and concern.
Haven't checked Voodoo and Radeon ever on OS4.1 but I guess that Radeon is the way to go for it. Steve has more experience for the whole 4.1 situation since he's going for the medal of Headbanging in OS4.1 installation and troubleshooting trying a lot of hardware :)
If you ever get bored of an CSPPC gimme a call bro :D
Hi to all
Yes, as Steve said, I think the best option is CVPPC & Radeon for 4.1 Classic.
But for 3.x? How I can install CVPPC & Radeon together? with Picasso 96 or I need to install also the CybergrahX driver?
For now I'm very happy with my CSPPC's.... :D one at 363Mhz other at 233Mhz..... and for the A1200 one new BPPC at 240Mhz...... I want to get the most of the two worlds.... 3.x and 4.1....... :D
You can't use CGX and P96 at the same time, although you can have both drivers installed you can't have them loading together from amonitor driver, it crashes the system, I tried it with CV64/3D and Voodoo together.
Maybe a better option for you is to keep one system OS3.9 optimal and one OS4.1 optimal, you could still run a nice OS3.9 setup with the Radeon but without Warp3D. Or you could use just the CVision under 3.9 (have no drivers loaded for the Radeon) :)
Steve.
Hi again
I unintalled P96 and delted the Radeon Monitor in Devs...
Then I installed CybergraphX 4 and...... I see the logo as RTG but WB loads as PAL hires...in ScreenMode I don't have other options. The CyberVisionPPC Monitor is in Devs..... No RTG..... :(
You need to go to Prefs:CGXMode and create some screen modes :thumbsup:Quote:
Originally Posted by merlinkv
CybergraphX 4 cd install several modes under Prefs:CGXMode but inside ScreenMode I have only PAL and WB starts at PAL only...... Sorry for my noob question :oops:, but how I can select a CGXMode?
I'm not sure what you are doing wrong, do the test screens work?Quote:
Originally Posted by merlinkv
"Cannot open test screen".... :(