Amiga 1200 + 3.1 ROMS + 2GB CF hard drive

Hey guys, my phone just died on me and I really need to get another ASAP due to pending interview opportunities and starting uni in 2 weeks. Unfortunately I dont have time to wait until my grant comes in either so need to raise about 100 or so to put toward what I have saved to get something decent that will last me a year or 2. Selling this with intention of buying another once I have access to my grant :D so just juggling possessions really.

And with that...
Here is my Amiga 1200! with 3.1 ROMs and 2GB CF hard drive with adaptor for sale.

Looking for £60 + £15 postage within UK (Would prefer UK only because of weight).

There is a very small chip in the top plastics, where the floppy drive is, the power LED recently gave out on me too so will need replacing. Think you can buy the whole unit pretty cheaply however, the other 2 work fine though. Keyboard is a bit yellowed as is top plastics but bottom plastics pretty white. Will supply with new screws in the case.

Otherwise pretty much all neat and complete, no damage to clips or anything. Mobo rev. 1D4 complete and solid.

I apologise for pics quality, the webcam on my netbook is all I have for pics at the moment.

What revision mobo is it?

IMO the best, 1D4 :)

---------- Post added at 19:54 ---------- Previous post was at 19:47 ----------

Revised description a bit for further detail. Pics added. :thumbsup:

Declaring interest and sending PM :thumbsup:

Pm replied. Awaiting response. :thumbsup:

Interested 2nd in line....

Take me out the lope will have to leave this for now

@AmiNeo
Before you declare the power LED as dead, try resoldering the relevant contacts (LED legs, resistor, wire to motherboard) on the LED PCB.
Had a similar case with the floppy LED a while ago. When I took the LED PCB out for a check, I noticed that when I pressed the LED a bit hard onto the PCB it worked fine. Relaxing the pressure got it non-working again. "Cold" joint, so I resoldered and it has worked flawlessly ever since (actually I resoldered everything on the PCB just in case :) ).

I'll take a closer look, thanks for the heads up :thumbsup:

Payment sent :)

PM sent, will arrange post as soon as I've got some packaging to keep her safe :) :thumbsup: