Printable View
recently i have buy a 1240 with mach130, with rom for 68060, with sockets for 68060 and i only need change cpu, mach131 and add a 3,3 volt regulator from my 12060 broken, and when boot from floppy are ok, from hd i need install 68060 library
if you need test i am on-line
main 1B
hi
that's very kind , I should be okay now. I have a new rom code and hopefully a new cpu coming too
thank you
i can test on 2b and other
my 68060 is xc68ec060 at 60 and i use the xtal 80 with jumper on 040, wichamiga report 80mhz not 40 and sysinfo crash
now go to read the version of the eprom and model
okay todays update:
my 1D1 motherboard has arrived, carried by a troop of angels in a golden carriage.:-)
well royal mail but near enough.
first inspection of the board - its beautiful , no bits missing or broke :-)
okay test time - boot instantly with or without the Apollo in it (which is good)
boots to classicADV WB but crashes... ive changed the cpu60 B to CPU60 F in the start up seq and its good to go!
fast booting and speedy in WB ....a joy to use.
now, dare I put the 68ec60 in my Apollo … ahhhhh
---------- Post added at 09:43 ---------- Previous post was at 09:31 ----------
my Apollo locks up on the 68LC060 info screen but the other Apollo doesn't get this - so time to burn a new rom.
cpu B and cpu F?
only for info, the eprom on my elbox apollo1240/1260 are a Intel d27c010-200v10 and are printed 60/561
sadly i don't know the rom version on my Apollo - it has no ID.
yes
CPU60 B and then CPU60 F (when its set to B it locks up sometimes)
---------- Post added at 09:51 ---------- Previous post was at 09:46 ----------
Hi again,
?
?
Btw,.. The Apollo 1260 75Mhz version has a LC cpu (with MMU but no FPU)? but if you have a ?75 Mhz version-eprom? and it works with your EC cpu (lacks both MMU and FPU) then it should be ok i guess. However, i remember i tested several EC cpu:s? a long time ago and i had lots of troubles with them (crashes). Since then i only use cpu:s that has both MMU and FPU..the ec is not good with this firmware or libs
?
Regards,
Per-Gunnar
have you got cpu60 before setpatch?
im assuming you use the same harddrive for both cards,try cpu60 w and set the caches after it boots,if it boots of course
also DONT use remapollo with your cpu mike remapollo requires an mmu.
without looking I'm not sure but i think cpu60 is before set patch
if you want to have cpu60 output status of the cpu,
try C:CPU60
thats it nothing after the cpu60 command,worth a try i suppose
or try C:CPU60 NF
so it cant use the non existent mmu
what am i talking about,you already know its the rom:doh: i think i need a coffee
now use on my 2b and work fine from floppy, now install 060 library on cf