well done mike,welcome to the amiga speed freaks domain.lol
have you got a 80mhz oscilator knocking around? it'll do that easy.
Printable View
well done mike,welcome to the amiga speed freaks domain.lol
have you got a 80mhz oscilator knocking around? it'll do that easy.
Thank you :-)
I think..
---------- Post added at 23:04 ---------- Previous post was at 23:01 ----------
No not yet John but I have tried 100mhz - it booted but only without the ram.
Perhaps edo ram 60ns will help the quest.
Maybe not :-)
great mate
my blizzard 1260@50 hate quake2 judders every where
the third youtube links not working
---------- Post added at 23:08 ---------- Previous post was at 23:07 ----------
ithink you mean roy mateQuote:
No not yet John but I have tried 100mhz - it booted but only without the ram.
whats ram is in there at the moment mike?
quake 2 is a real cpu pig john.
hey I'm tired and old :-) so there Arthur
Opps sorry John :-) , what ram is it? Haven't a clue.
I'll take a look tomorrow.
---------- Post added at 23:22 ---------- Previous post was at 23:11 ----------
I've yet to try quake 2. One of the YouTube vids is still uploading - 2 hrs later ...
A fail I expect.
it looks like 70ns ram in the top socket cant read the bottom one.
youve done a really good job on that card mike,it is rewarding converting these cards from 040 to 060.or any other card.
although i would say, like you to not try it if you havent got the know how they can be damaged very easely if you dont know how.
60ns ordered , so I'll have a play when it arrives but if not I'll have to lump it with 80mhz or so...
:-)
its all good mike:)
ive noticed your about to get your mits on a fastata mike ,may i humbly suggest replacing the rom socket's for ones that are of the round pin type you wont be dissapointed #im saying this because your not scared of a bit of soldering#
after this mod, you wont need any cable ties to hold it down and transfers are reliable at the fastest setting;)