Blizzard 1260 060@80MHz 64MB RAM

As in title, including selected 50ns 64MB SIMM working at 80MHz.
Card fits into standard A1200 desktop case without any problem.
Oscillator is socketed, so no problem with frequency change.

With 060@80MHz card reached 105MIPS!

Please be aware that SCSI KIT will refuse to work with 70MHz and higher.
So if you plan to use SCSI KIT I will add 66MHz, 60MHz or 50MHz oscillator (up to you).

060 cooling is a must if card will work with frequency higher than 66MHz. There is a possibility to switch-off fan by unplugging the fan if frequency will be 66MHz or lower.

Card in perfect visual and technical condition, new accumulator and fan installed. Box does not look perfect, but it's still ok.

You will get:
1) Blizzard 1260 with 80MHz oscillator installed
2) Original box (serial number does not match) with instruction, warranty card
3) 66MHz oscillator
4) 60MHz or 50MHz (chosen by you) oscillator
5) Floppy (not original) with 060 libraries

Asking 420EUR including insured and tracked shipment to EU. Shipment to other countries possible, please ask for extra postage fee. Will not be high though.

Payment by PayPal with option "gift" or standard + 4%.

Video:
http://youtu.be/0A-lPtgxKlI

Photos:
https://picasaweb.google.com/1101219...JGMpZXgrfP_zwE

Have a question - please PM me.

Declaring interest. PM soon.

About the SCSI kit, does it still work as a memory expansion @80 Mhz or not? Can you still close the trapdoor and fit a SIMM on the board with the cristal socketed?

Will this work in a desktop Amiga 1200?
If so, with trapdoor lid closed or open?

Quote:

---

Originally Posted by retrotrade

Will this work in a desktop Amiga 1200?
If so, with trapdoor lid closed or open?

---

Stan's Blizzard 1260's normally fit an A1200 Desktop, that's why he puts the fan on the other side.

There might be a slight bulge with the trapdoor shut but I would always leave it off or modify it with venting as these cards still run very warm.

Quote:

---

Originally Posted by fitzsteve

Quote:

---

Originally Posted by retrotrade

Will this work in a desktop Amiga 1200?
If so, with trapdoor lid closed or open?

---

Stan's Blizzard 1260's normally fit an A1200 Desktop, that's why he puts the fan on the other side.

There might be a slight bulge with the trapdoor shut but I would always leave it off or modify it with venting as these cards still run very warm.

---

I have one @80 MHz modded by Cosmos, but i can't use it because of the socketed cristal. The height of the socket + cristal prevents me to use anything but a small 8MB SIMM and the cover can't be closed at all. No good for my A1200D. I'm happy to have a genuine Phase 5 1260@50 to use instead. I am wondering if the cristal could be deported on the other side of the baord.

Stachu surely has an A1200D. So if he wrote that this card fit into A1200D than I guess he checked that on his Amiga before put it for sale. I also have stock DCE B1260/50 (I even didn't try to close trap door because of cpu heat) that I intend to swap with this one and sell the slower unit later on Amibay :D.

Quote:

---

Originally Posted by Xanxi

I have one @80 MHz modded by Cosmos, but i can't use it because of the socketed cristal. The height of the socket + cristal prevents me to use anything but a small 8MB SIMM and the cover can't be closed at all.

---

There are two types of SIMM holders:
Small 9,4mm and big 11,5mm:
https://picasaweb.google.com/lh/phot...eat=directlink
And if you have bigger (much more popular, because it can be found everywhere) - yes - you have a problem to close trapdoor.

---------- Post added at 17:49 ---------- Previous post was at 17:48 ----------

Quote:

---

Originally Posted by ITU

Declaring interest. PM soon.

---

Deal with ITU agreed, waiting for payment. :-)

Quote:

---

Originally Posted by ITU

Declaring interest. PM soon.

---

Posted to ITU. :thumbsup:

Of course payment sent already :D