10 Attachment(s)
FastRobPlus Massive Amiga Item Clearout
Hi,
I’m looking to clear out a bunch of Amiga gear to free up space. Sorry no pictures yet, I expect to have these populating over the next few days. (*edit* pics are here and also later in the thread)
Prices are USD. I can ship almost anywhere, but big and heavy items get really expensive when shipped overseas as I’m sure you all know.
SOLD Two Amiga 500s.
Both have:
North American NTSC and US QWERTY keyboards.
Yellowing
BAD keyboards (membranes – some key presses don’t work)
missing case screws
Roughly done 1MB chip ram mods (and NTSC 1MB Agnes chips)
Kick 2.04 ROMS
Trapdoor ram expansions
Trapdoor covers
Side expansion port covers
Fully functional (except keyboards as noted), including their disk drives
They come with 1 mouse and one US power supply to share between them.
USD $50 - Paid for by DeepSpaceTrader 7/18 - SHIPPED 7/19
Attachment 31188
SOLD Amiga 500 perfect condition buckling switch keyboard
Feels fantastic and makes the retro computing “klack” sound associated with early PCs. With this keyboard you can sound way more productive than you actually are!
Looks great and has no yellowing at all.
Steel (vs plastic in later models) construction – has a little rust, but cannot be seen when installed.
RED FLAG: Sits deeper than many A500 keyboards, so may interfere with tall things plugged into the 68000 socket, or some RF shielding. I had an AdSpeed in the CPU socket and the keyboard pushed down on it slightly.
US QWERTY layout
USD $40 - sold to Balooga - paid on 7/17 - SHIPPED 7/19
SOLD Large box of Amiga 2000 stuff
Front bezel and front LED, both “fair, not great” condition
Internal DD drive – untested. worked when last used
A2090 and 8088 bridgeboard cards, condition unknown (assumed they were working pulls)
5.25 drive for the bridgeboard - untested
CMI Processor accelerator – working pull – 14MHZ 68000 for an Amiga 2000 (wrong shape for 500/1000) – lacks FPU but can be fitted. - Dutchin has swapped this part for the A2300 genlock and a defective Allegra RAM. This part is now on hold for BlindGerMan.
Does have 20Mhz FPU crystal. Tested and confirmed working in an A500, but it does not fit in an A500/1000 properly.
Kickstart switcher – unknown condition
Bonus (not pictured) – very yellowed but fully functional US QWERTY A2000 keyboard. Casing and space bar are yellow, but other keys are white. Possibly a good brightening candidate.
NOTE: Shipped in a single-walled box. Probably best shipped in US/Canada.
USD $40 SOLD to DutchinUSA 7/19 - paid 7/19 - SHIPPED - 7/20
Attachment 31182
SOLD A1000 stuff
Full Amiga 1000 – same one I bought about 2 weeks ago on Amibay. Works – severely yellowed no side expansion slot cover, missing some screws (but I’ve thrown a few in) Drive has trouble reading disks, but I think it’s just the drive is not well aligned against the front bezel, preventing the disks for "dropping in" fully, and actually is functional.
256KB front expansion module – I think it’s DKB or another of the top-tier 3 rd party devs. But it isn’t commodore.
A second full Amiga 1000 motherboard /daughterboard– a working pull spare I’ve been keeping. Recently tested as fully working. No reason to think it does not still work.
A1010 disk drive – crack in the front, but reads disks well. I’m sad about the crack – the drive itself is really white.
One Amiga US QWERTY layout keyboard. Very yellowed but works. Cable is very stretched but also works fine.
Note: Shipped in a double-walled box. Should survive even overseas shipping, but this would be a very expensive package due to weight!
Selling because I obtained a like-new A1000 privately outside the internet, and won't need these items after all.
USD $60 SOLD to DutchinUSA 7/19 - paid 7/19 - SHIPPED 7/20
Attachment 31181
SOLD ACARD 7720iw SCSI bridge
Bought for an A3000 project, but never used. Untested. Went IDE route (Buddha) instead as my CSII disabled my SCSI.
Again – selling cheap because it’s untested and don’t even know if it’s the right style SCSI bridge for an Amiga.
Please buy only if you know what you are doing.
Comes with some other random bits which may be useful.
USD $40 Sold to UberFreak on 7/18 - paid on 7/18 - SHIPPED 7/19
Attachment 31184
SOLD KCS Powerboard PC Emulator for A500 - Rev 4.2
Works – recently tested in an A500.
Disks are copies, but work great!
Pretty sure it requires an A500+ or an Amiga with the 1MB Chip RAM mod.
PIC FURTHER DOWN IN THIS THREAD (Post #13)
USD $45 SOLD to CK16 on 8/13, paid on 8/13 -SHIPPED 8/14
SOLD Dataflyer 500 Sidecar Hard Disk/RAM Combo
SCSI only version.
Has optional DataFlyer RAM board which is populated with 4MB RAM (half-full) 8MB RAM
Unit will NOT BOOT with its current SCSI drive (spins up/down continually.) I believe the load is just a little too great (due to full RAM load out) for the A500/PSU, because it booted with an earlier SCSI drive, and will boot with this drive removed.
Original disk included.
Case held on with wrong threaded screws (I just discovered this) But you can’t see this from the front/top.
I can remove the drive to lower shipping costs.
USD $70 Sold to Adve - PAID on 8/7 - Shipped on 8/9
Attachment 31191
SOLD GVP HD 8+ Hard Disk/RAM Combo
GVP’s pretty external SCSI drive for the A500
No PSU – takes power from the A500 – needs a healthy PSU (most seem to work, but I’ve seen some that do not)
Has an ancient SCSI drive and 8MB RAM
Case looks fair externally – it has a hairline crack on the inner right front side that is tough to see, and has internal damage (some plastic bits that hold the fan and an case screws snapped) – does not affect performance
I can remove the drive to lower shipping costs.
PICS FURTHER DOWN IN THIS THREAD (Post #13)
USD $100 SOLD to Curtis - 7/25. SHIPPED on 7/27
SOLD ICD AdSpeed
Tested and works
ICD sticker fell off the top, or the CPU has been replaced at some point. Either way, it’s the correct 16Mhz Motorola 68000 CPU.
I have issues booting the A500 unless booted in 7Mhz mode, then software switch to 14Mhz, but I don’t think this is a physical problem with the AdSpeed, as all my AdSpeeds have done this. I can’t exactly remember what causes this.
AdSpeed has known incompatibilities with the GVP HDD that can be worked around.
Comes with copy of the install disk and no packaging or docs.
Accepts and overclocks a 12Mhz 68010 chip readily available off of eBay if you want a 68010 powered accelerated Amiga. I'd offer to sell you mine, but I'm using it in my other AdSpeed!
USD $70 - SOLD to BlindGerMan, along with CMI Processor Accelerator listed above - paid 8/5/2012 - SHIPPED 8/7
SOLD GVP 286 Module
286 module for GVP Impact HD8+ and 530 turbo sidecars
Tested in the above GVP HD8+ and it works fine. I had gotten this in a 530 that died and never got to test until I recently obtained the HD8+ listed above.
Comes with copies of the install disks.
PICS FURTHER DOWN IN THIS THREAD (Post #13)
USD $75, or $60 if bought along with the GVP Impact HD8+ above. SOLD to Curtis - 7/25.
SOLD Archos AVideo
Bizarre early internal color device that sits between the Denise socket and the Denise chip of an A500, 1000, 2000, or 3000
Check your computer for possible fit issues.
I tried this in an A500 – it sort of worked… It requires a bunch of fine tuning in software, and I got it to display some high color stuff, but was never able to get it running completely. Not sure if the card has issues, or my lack of French (the software and any info you will ever come across is primarily French)
Cool conversation piece – Archos’ first major HW project. I remember wanting this more than any other upgrade back in the late 1980’s early 90’s when InovaTronics promised to bring it to the US market as their own flavor of Colormaster 24 and support it in CanDo.
Comes with copies of the disks (I made from the Amiga HW Database website)
USD - $75 SOLD to LTAC - paid 7/23 SHIPPED - 7/25
Attachment 31185Attachment 31186
SOLD Picasso II
Bought from here a few months back – works perfectly, Asking less than I paid.
Comes with no docs or disks, but does include the pass-through cable for use with a flicker fixer.
USD $135 Sold to SEgamer Paid 7/20 - shipped - 7/23
PICs are in the thread under post #42
SOLD A2300 internal genlock
NTSC
Worked in my A3000 (sent video to a composite monitor) but my A3000 would not boot and display VGA out with the card installed. I pulled the card but since learned that you need to feed a composite signal to the card when used on the A3000… So pretty sure it's fully functioning, but I've decided I won't be using it anyway.
PICS FURTHER DOWN IN THIS THREAD (Post #13)
USD - $25 SOLDto DutchinUSA 7/19 - paid 7/19 - SHIPPED - 7/20
SOLD Broken X-SURF
Can’t remember if I bought it from here or elsewhere.
Possibly broken – but recognized by autoconfig. I say possibly broken because I had it working for about 10 minutes once, with Miami. I tried to config for hours with Miami, Genesis, etc. with no success (sometimes would see my network, sometimes not.) I have a DENEB now so I’m cutting my losses. You can take a chance that it works, but please buy this knowing it may truly be broken.
USD - $45 - Sold to Bebek - paid 7/17 - SHIPPED 7/19
SOLD DataFlyer SCSI and DataFlyer RAM with 8MB 4MB
Two half length cards that may be used separately in a big box Amiga, or the DataFlyer RAM board my be pressed onto the DataFlyer SCSI card to form one uber Zorro II card. Typically, this would have been done to place the card into an external housing or a zorro adapter for an Amiga 500.
Both were working pulls, but not recently tested.
May be best for an Amiga 2000, as the boards are ZII and likely draw a lot of power.
PICS FURTHER DOWN IN THIS THREAD (Post #13)
USD $40 SOLD to ThomasFlyer - Just the DataFlyer RAM board with 4MB, which I'm selling for $32 shipped. - SHIPPED on 8/9
SOLD Amiga 1200 with DKB Cobra 030 and Ferret SCSI - Broken/for parts
This is something I JUST got. An Amiga 1200 with an accelerator. I bought it for just under 100 'as-is', but I was unprepared for how 'as-is' it actually was. Aside from yellowing of the keyboard, the case seems to have no lights (not broken - they arent there! Does that mean the keyboard is wrong?) The system does not power on - not even with the accelerator removed. The A500 PSU I tried did not help. There is no HDD.
It came with a DKB Cobra at 33Mhz, with FPU. I suspect the Cobra is also dead - its got a broken clip on its SIMM socket, and the battery is bulging a bit. It looks okay otherwise, but given how bad this Amiga has been cared for, I'd bet on the card being in bad shape too. I have no other A1200 to help me test.
The Ferret SCSI controller was attached to the Cobra. Like the Cobra, I have no way of testing.
I knew the minute I'd opened the package I made a compulsive mistake jumping in and buying an Amiga 1200. My experiences with this machine never end well. I only bought it to play Klondike Solitaire, since it requires AGA. I'm asking what I paid for it to see if someone else wants it for the parts.
USD $100 SOLD to ByteRider (who wants just the Ferret) PAID on 7/20 - SHIPPED on 7/23
SOLD to DutchinUSA (A1200/Cobra) PAID on 7/19 - SHIPPED on 7/20
Attachment 31187Attachment 31189Attachment 31190
Packaged Arrived: "Amiga 500 perfect condition buckling switch keyboard"
Packaged arrived ("Amiga 500 perfect condition buckling switch keyboard"). Positive feedback left.
Thanks very much :)
