Retina BLT Z3 4MB / Cyberstorm MKI 060 / SCSI MKI / Cybervision 64 4MB / Arxxon Scandoubler / Fastlane Z3

UPDATE!!!


time to sell some stuff :smile:

1. Retina BLT Z3 RTG card, 4MB *SOLD ELSEWHERE*

• working perfect, very good shape. Price is 120€ + shipping

2. Cyberstorm MKI 060@50Mhz, 64MB Ram *SOLD TO NZUNTA*

• working perfect, very good shape. Price is 330€ + shipping

3. Picasso IV RTG card + FlickerFixer

• working perfect, good shape. No Install Disks or manuals. Price is 350€ + shipping

4. Cyberstorm MKII 68040/40Mhz with 32MB

• working perfect, very good shape. Could also sell a 060 processor if you want to upgrade it later (more things needed) Price is 250€ + shipping *NOW SOLD TO jvdw007*

5. Amiga 4000/030 Desktop

• working perfect, very good shape. KB on request. Price is 350€ + shipping (30€ to EU, 70€ to worldwide)

6. Arxxon / CompServe Scandoubler BOXED

• working perfect, very good shape. No manual but Disk. Price is 95€ + shipping

7. AT BUS 2008 HD Controller + 8MB Ram + 40MB HD

• working perfect, very good shape. Price is 125€ + shipping

8. A2286 Bridgeboard + Sandwich + Disks + manuals (german)

• working perfect, very good shape. This is a Rev A Board. Price is 90€ + shipping

9. Amiga 4000/040 + Tandem IDE + CD Rom

• working perfect, very good shape. KB on request. HDs need a new installation. Price is 425€ + shipping (30€ to EU, 70€ to worldwide)

10. CDTV Set - Unit, keyboard, remote

• good condition. Comes with original black CDTV keyboard and remote. Also included is a white CD caddy. Price is 190€ + shipping (20€ to EU, 70€ to worldwide)

11. Kickstart 3.1 Roms A1200 NEW OLD STOCK, 10 available

• 18€ per set + 5,50€ tracked shipping

Pictures available via PM on request.


PayPal fees have to be paid by the buyer.


EU/Worldwide: Up to 1kg it's 9€ tracked + 1,50€ for each 100€ insurance.

To Germany it's 5,90€, doesn't matter how much of the small items. A4000Ds cost 10,90€.

Does the CompServe scandoublers work with TFT/LCD monitors?

Yes, they do. In my opinion the Compserv/Arxxon is the best Scandoubler for the Amiga.

Darksun777: Thanks.

Declaring interest in:

5. Arxxon / CompServe Scandoubler

Edit: PM sent.

Monitor has to support 50hz if you want to use non-indivision scandoubler.

Quote:

---

Originally Posted by Jakodemus

Monitor has to support 50hz if you want to use non-indivision scandoubler.

---

No... I think it is the 31khz wich causes the most problems

Quote:

---

Originally Posted by Rotzloeffel

No... I think it is the 31khz wich causes the most problems

---

Scandoubler doubles the horizontal scan rate from 15.75 kHz to 31.5 kHz, but doesn't change the vertical scan rate, which is 50hz in PAL Amiga's. Most modern LCD's only support 60hz.

As per specification, my LCD supports 56hz to 61 hz and the Scandoubler works fine.

I think you're right, not *all* LCD's will work with a Scandoubler, but i think the most will.

Interested in Fastlane Rev. 2.4.

Quote:

---

Originally Posted by Jakodemus

Quote:

---

Originally Posted by Rotzloeffel

No... I think it is the 31khz wich causes the most problems

---

Scandoubler doubles the horizontal scan rate from 15.75 kHz to 31.5 kHz, but doesn't change the vertical scan rate, which is 50hz in PAL Amiga's. Most modern LCD's only support 60hz.

---

My screen is spec'd:

Horizontal 22 ~ 82KHz

Veritical 56.3 ~ 76Hz

Do you think it will work?