A600 4mb and A500 4mb/8mb fastmem Expansion boards

Quote:

---

Originally Posted by Tajmaster

http://postimage.org/image/7gzj6jhg/

Theres a pic of one here. I got this off Google :)

---

i think there will be lots of cleasrance. it looks like the shield sits on the plastic screw header so we should be set :)

Quote:

---

Originally Posted by kipper2k

Quote:

---

Originally Posted by Tajmaster

http://postimage.org/image/7gzj6jhg/

Theres a pic of one here. I got this off Google :)

---

i think there will be lots of cleasrance. it looks like the shield sits on the plastic screw header so we should be set :)

---

Awesome! When can I order? :D :lol:

Quote:

---

Originally Posted by kipper2k

to keep costs down for people and allow the rev 6 boards to be used in the A1000, i have created an A1000 CPU adapter board which will allow the board in the A1000 to sit approx 1 inch further away from the floppy drive and about half inch to the right. Due to the fact that a little extra height is not a concern this should work well and allow the 34 pin cable of the floppy to be reconnected.

I'll post pics later and if someone can print, cut it out and test the layout that would be great,

Thanks

ps, board would be about $7.50 :)

i will be sending more email requests today requesting payment

---

Great news:bowdown: Please put me down for one 8MB expansion and one extension board to go into my A1000:thumbsup:

Nice one Kipper! I want one too for the A1000. 8MB please.

I received tha A500 8 MB expansion and I tested it. It works great.

I give you a positive feedback.

heres a pdf of the A1000 cpu adapter.

print and cut it out and see if the floppy can be connected with it in place. Looks a little confusing, but basically the top CPU is where it sits in the CPU socket, and the bottom cpu is where the memory board plugs into.

If it needs adjustments, let me know how much extra/less etc


http://kipper2k.com/a1000cpuadapter.pdf

Quote:

---

Originally Posted by awmosoft

I received tha A500 8 MB expansion and I tested it. It works great.

I give you a positive feedback.

---

thankee :)

Just one question. A500 rev 5 expansion works in a rev 6? I have an AdIDE and a Mega Midget and can´t close the case otherwise.

Quote:

---

Originally Posted by pinkstone

Just one question. A500 rev 5 expansion works in a rev 6? I have an AdIDE and a Mega Midget and can´t close the case otherwise.

---

The Rev5 board will fit in a rev 6 A500, but i don't know what the ADide and megamidget boards look like.

Quote:

---

Originally Posted by kipper2k

heres a pdf of the A1000 cpu adapter.

print and cut it out and see if the floppy can be connected with it in place. Looks a little confusing, but basically the top CPU is where it sits in the CPU socket, and the bottom cpu is where the memory board plugs into.

If it needs adjustments, let me know how much extra/less etc


http://kipper2k.com/a1000cpuadapter.pdf

---

Looks good, I can check later for you.

Any plans to do something with built in IDE? Maybe based on IDE68k? A500/A1000 badly needs this!

Great!!

For future references, here is the link for the AdIDe:

http://amiga.resource.cx/exp/adide

and the Mega Midget:

http://amiga.resource.cx/exp/megamidget