Printable View
Thanks my friend Kipper2k!!!!!!!:)
i received my card and working !!!!!!!!!!!!!!! with stability on whdload games i try many of them with 5.5 mb and 8mb configuration (in my amiga 600 i working with PFS3 partition under 1GB the CF is 2GB TRASCEND 133x)
i tel this because i have already(not from you) nedo design fast memmory 8mb without jumper but crash after little time i think the problem is mabe from cpu socket :unsure:is not the quality like yours;)
THANKS!!!!!!!!!!!!!!!!!:D
Can someone confirm whether the A500 board works and physically fits in A2000? And would the RAM conflict with RAM on 2091 controller? Thanks.
Hi Kipper, Payment sent for items you advised that are ready:Quote:
Originally Posted by djos
a504 ram board
svideo adapter
I would really like one of the 8mb boards for the CDTV but I'm getting conflicting reports as to whether it works or not.
The problem seems to be that the CD-ROM is disabled if the board is populated with 8mb.
Are you planning on adding the 8mb A600 memory switching to the A500 8mb board?
If it is the 8mb causing the issue then I could switch to 4mb to use the CD-ROM and use the 8mb for e.g. WHDload games.
Hi Arnie,Quote:
Originally Posted by Arnie
I will design the a600 8mb multi config board for the a500 if there are memory conflicts with the CDTV etc. it will take a few weeks for me to get done, lots on the plate
@kipper2k
Hi my friend :)
Items received days ago. Very sorry for the delay updating the thread :oops:
Not tested, but everythig seems to be OK :)
Feedback on this way :thumbsup:
I did some more checks with my A600 8Mb board and I cannot get the 5.5Mb or 1.5mb configuration to work at all. I tried reseating the board, tried fastening it to the board with the screws, nothing helps..
Config 5.5 reports 4Mb available and doesn't work reliably (whdload crashes). Config 1.5Mb gives me actual 0Mb of ram (thats whats reported). Config 8 reports 8Mb available and works even less reliable :(. With 4Mb config I get 4Mb but some whdload installs don't work when they work perfectly fine in winuae with the same configuration.
With 5.5 config I get the following output from memcheck:
Testing expansion memory ($00200020-$005ffffff) ... no errors found
Testing chip memory ($000000420-$000fffff) ... no errors found
Skipping private memory ($00000400-$00d7fffff).
With 1.5 config I only get the Testing chip memory and Skipping private memory outputs...
I can make pictures tommorow... would really appretiate some customer support here kipper, since I cannot use this memory expansion as intended. Getting desparate here :(
Hi Tom-Cat ,
installed this 8 MB Board without any main issues in an A600 , works perfect with 1,5 / 4 / 5,5 and 8 MB .
Only one little exception , if you want to use a flashcard adaptor on the pcmcia port you have to choose the 5,5 MB instead of the 8 MB option , cause this disable the pcmcia port .
But WHDLoad works perfect on this little one , without a doubt :)
So finally i think some other things with your A600 went wrong
No worries, I'm a patient man.Quote:
Originally Posted by kipper2kHi Arnie,Quote:
Originally Posted by Arnie
I will design the a600 8mb multi config board for the a500 if there are memory conflicts with the CDTV etc. it will take a few weeks for me to get done, lots on the plate
EDIT: Is it ready yet?
Why ? everything else works fine with my A600, I am not sure why would the A600 be a problem ?Quote:
Originally Posted by stefan_st
The expansion I got definetly has problems since with 1.5 Mb I actually get 0Mb reported, with 4Mb I get whdload problems, with 5.5 Mb I get 4Mb reported (and see the memcheck report in previous post where it says that some memory is "private" and is skipped - same for 1.5 Mb) with 8Mb I get huge problems with programs and games not running at all. I think it is faulty expansion, since I don't see how anything else could be a problem. If someone has any other ideas please tell me (Kipper ?).