Ratte Auto Monitor-Switch

I have some Auto Monitor-Switch to sell. !!!!!! ALL SOLD !!!!!!

This is for the board only, you will need to make up cables as per your setup. You need to do also the cable for +,-,signal.

For further details see:

http://www.a1k.org/forum/showthread.php?p=417467

I've tested each Switch on my Indivision MK2 / Bvision A1200 Config.

Asking 40 Euro each + Shipping, paypal gift

Ratte made two versions of this switch. One for the INDI flifi MKI and one for the INDI MKII.

which is this one for?

It is exactly the one from the link I wrote. I have it working with my individion mk2 of course in vga.
If you know a different model, please give me the link. As I know, there is an internal and external version. External is the same in a box... To get the switch working with indy 2, it is just a matter of cable, all pinout are on the link above.

Ok. Thanks for letting me know.

This one is one fantastic piece of hardware.

Here is a small video of it in action.

http://www.youtube.com/watch?v=vKcZkl0JX3U

interested, pm later (morning, i am in bus now)

Interested. Do you know how I can use this for my A3000T and Voodoo PCI card?

Count me in line for one please.

Interested in one! PM on the way!

Interested. Next in line.

@TjLaZer

It should work, but I do not know how the cables has to be done and connected.
You have to look on the link I wrote on the first post. I personally only tried with the Amiga I have Bvision/indy mk2.

Look at the link in first post in this section :
- OPTIONAL-SETUP (for different configurations) 0.6 and 0.8

---------- Post added at 21:45 ---------- Previous post was at 21:31 ----------

There are 4 pieces, here is the line :

Assahi
TjLaZer
Xanxi
bcmdesign
Snb3

One for me please! PM follows!

Declaring interest

Picture added in post one

I declare interest .

One sold @Assahi, payment received

well, little bit late, but i still want to be in the line if there will be another batch for sale :thumbsup:

it can also be as "KIT"

Hi :)

I have a Indivision MKII ( A1200 ) and Bvision. It´s possible to you to make the cables? I will pay it of course :p
Monitor switch + cables. If yes i´m interested ;)

Regards
Pedro :thumbsup:

@Virge. I sent you PM with explanation.

Payment sent! :thumbsup:

Payment received from bcmdesign.

Waiting for TjLaZer and Xanxi response.

Interested, I guess that makes me like 327th in line :)

I'm Definately still interested pending some questions being answered. ie can we get these to actually work or will they collect dust on shelf.

I replied your questions per pm with all necessary informations to get this working on your amiga.
This definitively works with your migy but as explain in pm, you have to build the needed cables for your config.

If you can build the cables, the switch will never collect dust on shelf :-)

Thanks to Ratte, this is a very very useful piece of hardware...

Payment sent :)

Payment received, will be posted tomorrow. Thanks

Interest next line. Send PM.

TjLazer probably can't decide if he needs the switch or not. I replied him by PM with all needed info but got no news or payment although he opened the PM.
As per amibay rules, without response within 24 Hours, Snb3 is the next in line. Sorry, I want to move on other things.

@Snb3, I sent you PM.

Payment sent. :)

Payment received. Thank you.

Please Moderator, if it is allowed, could you re-open the thread as I have 3 last switch to sale.

I am following the line order :

holzroller
xterminated
Marmes
chain
esc
superbonio

Thanks in advance.

Quote:

---

Originally Posted by gseb

Please Moderator, if it is allowed, could you re-open the thread as I have 3 last switch to sale.

I am following the line order :

holzroller
xterminated
Marmes
chain
esc
superbonio

Thanks in advance.

---

Done.

It may help if you drop them a PM and point them back to the thread.

Dave G :cool:

Thanks. I PMed them.

One sold @holzroller

Interested in one, next in line please. Gseb, please Contact me if other do not want it anymore.

The monitorswitch arrived today! Well packed! Thanks mate. :thumbsup:
Feedback on the way!

Payment received from Marmes. I will send it by tomorrow. Thanks

Hello!

I'm interested in one too. Are there any left? How much would postage (airmail) be to Melbourne, Australia?


Cheers,
ck

Switch is here! Very well packed! Positive feedback left! :thumbsup:

I have received my switch, thanks.
Now i have to go after the cables.
Leaving feedback now.

Are any more available? If so, declaring interest. :thumbsup:

Quote:

---

Originally Posted by nikos.rizos

Ratte made two versions of this switch. One for the INDI flifi MKI and one for the INDI MKII.

which is this one for?

---

the latest batch came in an external housing 4 plug & play
http://www.a1k.org/forum/attachment....4&d=1345755616

its the "old" - switch

im planning to bypass the mk2-dvi-connector/dvi-vga constructions with an addon for the switch.

it should include the climbing diods and will fit on the switch and provides a 20-pin connector from the mk2.

br
Ratte

edit: i made replacemants for the cables from the first pic ... they produced ghosting caused by bad grounding

http://www.a1k.org/forum/showpost.ph...&postcount=185

The external version is very good
a very nice hardware
thx ratte
waiting for your add-on

got mine today!
leaving positive feedback.

Looks great, cant wait for my unit! :blased:

Do you have any left? External? I still
Want one.

Package received. Positive feedback left.

Package received. Can not test it, because the Indivision ist just planned, but will do it soon :)
Thanks

Interested in 2 parts

Interested.

are there any left?

declaring interested

Payment sent! :D