Printable View
i would hold out and get the 50mhz cpu, not sure on performance difference but for the cost differential i think its worth getting the 50mhzQuote:
Originally Posted by bigbangtech
My choice for the video output on this would be either Svideo through the RGB port or Indi ECS
I think this is one area where Europe was streets ahead of the Americas with Scart. Made some fresh rgb to scart cables but also have the ECS Indi. I am wanting to get the on board flicker fixer working out of interest more than anything.Quote:
Originally Posted by kipper2ki would hold out and get the 50mhz cpu, not sure on performance difference but for the cost differential i think its worth getting the 50mhzQuote:
Originally Posted by bigbangtech
My choice for the video output on this would be either Svideo through the RGB port or Indi ECS
Hope I'm not too late, but I would like to express interest in one board, with tsop flash soldered. Turns out my board is a rev. 1, while this is a rev. 4!
I also declared interested in one of the first pages of this thread, but i would like to add the tsop flash soldered option if possible :bowdown:
Initial payment will be the board only. Further services can be added if Kipper2k offers them but this will result in a delay in yor receiving the board (he has to solder them of course). There is no guarantee this service will be offered.Quote:
Originally Posted by Sleepy_Man
---------- Post added at 19:35 ---------- Previous post was at 19:34 ----------
We now have everything we need now Georg has taken the time to explain it to us.Quote:
Originally Posted by hardyangelWhat is a TSOP one ore more that one programmed IC on the Board?Quote:
Originally Posted by PJMPrice for the TSOP is yet to be sorted but won't be a lot. Its the most complicated to solder but to be honest, once you've got the hang of SMD you'll find it relatively easy. Kipper2k will offer this service if he chooses to do so. We need the logic file for this TSOP, its not in the files from Georg website.Quote:
Originally Posted by hardyangel
Shipping cost to Germany would likely be under $20 IMO. But this can't be 100% until we have the boards to physically weigh them.
If the "logic files" are not on the website how you will get them?
Georg write on his website he don't help ore support anyone at this project.
Please accept my commitment in purchasing one of the aforementioned boards!
I want to order one board ...
Gesendet von meinem iPad mit Tapatalk HD
how many orders is that now PJM ?
:-)
---------- Post added at 20:27 ---------- Previous post was at 20:27 ----------
how many orders is that now PJM ?
:-)
126. We'll see how many actually pay shortly :).
Put me down for one board. I should be able to do the TSOP myself, but I would be interested in knowing the price difference for having it done.