GBA1000 New board production (V4)

Regarding the payments....how will we be notified? Here on the forum, via PM, or?

Thanks!

The forum :).

i use a video port to scart that i made years ago on my 1200 ,and its crystal clear on my 40 inch led ,i actualy can read the writing clearer than my miggy monito weird but works ace.

Quote:

---

Originally Posted by PJM

The forum :).

---

This hasn't got a slightly devilish secondary goal in mind has it? :unsure:


Like, Like LIKE around 80 feedbacks in a very short timeframe!!!!






:p


heh

Damn...busted... :D

There is a chance that we obtain the common parts (without Commodore chips) with the same method as the motherboard.
(I'm sorry if this is cheeky suggestion)

+1 Mohican

===> sockets, capa, resistors, chips RAM, processor, connectors.
All without that we can find in a A500 or A600.

In this case, we all receive our PCB and 90% of the component list, for a better price and low shipping cost.

PS: sorry for my poor english...

Some of the components yes but it would require serious investment to do the lot. Your talking a few hundred dollars per board x 130 boards so far.

We're better off group buying the RAM, Processors etc, maybe the GALs and PALs. Everything else is easily available from most suppliers like cpc or rs components. For the smaller components there will be a list with links, just click the link, add to basket and buy. Hopefully there will be a European and an American list.

Quote:

---

Originally Posted by yamakakiche

+1 Mohican

===> sockets, capa, resistors, chips RAM, processor, connectors.
All without that we can find in a A500 or A600.

PS: sorry for my poor english...

---

I think it would be good a common part pack; sockets, capa, resistors, chips RAM, connectors, because all of these things available as new.
The processor is questionable, because in some cases already have, and almost available as second hand. (but I'm interested in a full set of course)

---------- Post added at 11:30 ---------- Previous post was at 11:25 ----------

the ordering would be similar as the PCB. Pre-registration, and prepay.

Quote:

---

Originally Posted by PJM

Quote:

---

Originally Posted by hardyangel

Quote:

---

Originally Posted by PJM

Price for the TSOP is yet to be sorted but won't be a lot. Its the most complicated to solder but to be honest, once you've got the hang of SMD you'll find it relatively easy. Kipper2k will offer this service if he chooses to do so. We need the logic file for this TSOP, its not in the files from Georg website.

Shipping cost to Germany would likely be under $20 IMO. But this can't be 100% until we have the boards to physically weigh them.

---

What is a TSOP one ore more that one programmed IC on the Board?
If the "logic files" are not on the website how you will get them?

Georg write on his website he don't help ore support anyone at this project.

---

We now have everything we need now Georg has taken the time to explain it to us.

---

OK, my friend from a1k want now to 100% also a GBA Mainboard. That means I update my order +1 GBA Rev. 4 Mainboard.