Printable View
k, i'll PM you in a minute.Quote:
Originally Posted by BloodyCactus
I still need the TSOP service done. If you pm me your address, I'll send you my lonely single 29F800 chip so thats one extra in the kitty for the group.Quote:
Originally Posted by kipper2k
Components list updated a minute ago, as usual, everyone check to make sure its accurate
thanks
http://www.kipper2k.com/gb1000parts.htm
Kipper2k i'm not in the list for :
4 Zorro II
2 Agnus
please add me
Thank you
For me:
MC68030 x1 $35
CPU socket x1 $5
Chip mem x4 $5.92
Fast mem x16 $27.04
Zorro II x4 $4
Video Hybrid complete x2 $22
Video Hybrid mobo 22pin x2 $2
MSM6242B RTC clock x1 $4.50
Agnus x1 $9.50
OSC 28.37MHZ x1 $4.75
Total $119.71
The "video hybrid kit" isn't needed, it is? I mean, with the Video Hybrid complete x2 is all included, isn't it?
If not, add it please
Video Hybrid kit x1 $5
Total $124.71
Thank you!
TSOP already paid with the mobo
I'll get that in the mail. I might have some extra CIA's too I'll check my chip stash. (can you add yakumo9275 for the tsop, I keep forgetting I have a diff nick on this forum).Quote:
Originally Posted by kipper2k
--yakumo9275
I think my message has gone unnoticed...
I try to propose it again...
If possible I will order:
(everything needed x 2 boards, except Video Hybrid complete only for one):
- CPU MC6803050 x2
- CPU Socket x2
- Chip Mem x8
- Fastmem x32
- Zorro 2 socket x2
- Video Hybrid complete x2
- Video Hybrid mobo 22 pin header x2
- MSM6242B RTC clock x2
- Agnus x2
- Osc 28.375mhz x2
(+ 2x TSOP soldered)
Thanks!
@kipper2k
I've just realized - are the Agnus chips you list PAL or NTSC, or does it not matter for the GBA1000?
For me:
Fast mem x16 $27.04
Zorro II x2 $2
Video Hybrid Kit x2 $10
Agnus x1 $9.50
TSOP (not mounted, just the part) - $2
$50.54 total
Thanks
KIPPER2K
4 Zorro II slot
2 Agnus
2 TSOP
Tot:16$
I have payed before the rest.
Thank you
Toolkitman
kipper are you working on the ISPLSI1024-60LJ
and the gal chips if so let me know for all of them, and anychance you can do a deal for all the other sockets , i want everything socketed, with rolled sockets the nice 1,s can you do that?????
it might be good to remember that he is doing some things for us to be nice like the TSOP because thats hard to do for mere mortals used to DIP parts and not SMT.Quote:
Originally Posted by webheadx1
you are going to have to source some parts yourself, from ebay, farnells, mouser, digikey etc.
He might be able to source every single chip and socket you need, I think asking him to do such is a bit unfair, and so much extra work on his part.
maybe you can find others in england to do a PAL/GAL group buy + program them all together etc or a socket group buy. Expecting kipper2k to do everything for you is asking a bit too much imo.
I can source and program all the PAL/GAL's - but it would depend on interest, as I needed to order a largish amount to make it worth it.
Hi Kipper2k,
You forgot my TSOP!
Please correct!
Though I'm not in the UK, I can also program all the chips if needed.Quote:
Originally Posted by BloodyCactus
Quote:
Originally Posted by webheadx1
I'll work on the sockets and the Gals once boards and other components done, i think prices should be good, if anyone else finds good prices then let us know. I'll check my supplier and see what she is asking for them
http://www.kipper2k.com/gb1000parts.htm
I don't mind sourcing the parts as it is saving on the ultimate costs of paying postage costs many times, It is a little tricky trying to keep everything updated... Patience is a virtue, If i can get a good price for people then its worth it, just remember i have a job and other things on the go as well (at least until September :)
---------- Post added at 18:05 ---------- Previous post was at 18:00 ----------
Quote:
Originally Posted by Bad_Ad84
Can you give a sample price based on diff quantities... i'd say between 30 to 50 boards worth
many thanks kipper , its just the price in england sucks at the moment for electronic parts so the more i can get off you the better but i do respect its hard work for you and i thank you for everything many thanks.
Roger thatQuote:
Originally Posted by kipper2k
Put me down for that too please! I will send the $7 + fees through now :thumbsup:
To clarify, I have brought 3 boards but only going to build 2 :)
p.s. swapping to Canadian currency
---------- Post added at 08:25 ---------- Previous post was at 08:17 ----------
I was wondering about this too and I thought PJM was going to source Pal Agnus as a possible optionQuote:
Originally Posted by ajk
Then I also asked if I could just steal a couple from a socketted A500+ perhaps?
I'd like a PAL system in my PAL country even if it doesn't matter
Can someone please clarify this for us? :thumbsup: I know this thread is pretty busy, but lets not try and forget the poor queries from the uninformed ;-)
Hi kipper, i paid for 2 cpu sockets but theres 4 on the list.
Thanks
Quote:
Originally Posted by SlayerRoger thatQuote:
Originally Posted by kipper2k
Put me down for that too please! I will send the $7 + fees through now :thumbsup:
To clarify, I have brought 3 boards but only going to build 2 :)
p.s. swapping to Canadian currency
---------- Post added at 08:25 ---------- Previous post was at 08:17 ----------
I was wondering about this too and I thought PJM was going to source Pal Agnus as a possible optionQuote:
Originally Posted by ajk
Then I also asked if I could just steal a couple from a socketted A500+ perhaps?
I'd like a PAL system in my PAL country even if it doesn't matter
Can someone please clarify this for us? :thumbsup: I know this thread is pretty busy, but lets not try and forget the poor queries from the uninformed ;-)
One thing i noticed, the LSI1024 shows that it has code at 60Hz... 60Hz is used in NTSC systems and not PAL (PAL is 50)... i don't know if this is significant or not
Just paid for CPU with socket, 3x Zorro connectors, 16x FAST and TSOP :thumbsup:Thank you.
197,42 sent for (next time I have to sell my car):
- CPU MC6803050 x2
- CPU Socket x2
- Chip Mem x8
- Fastmem x32
- Zorro 2 socket x2
- Video Hybrid complete x2
- Video Hybrid mobo 22 pin header x2
- MSM6242B RTC clock x2
- Agnus x2
- Osc 28.375mhz x2
(+ 2x TSOP soldered)
:thumbsup:
I don't think that relates to anything PAL/NTSC, it seems to be part of the CPU "glue-logic" circuitry. But there's mention of a 60 MHz maximum operating frequency in the datasheet (if that's the correct one).Quote:
Originally Posted by kipper2k
Hi All,
Just an update, i have put in the order for the components so that hopefully everything arrives at the same time. I ordered 50 CPU's and i am down to 3 left on this order so once i reach the 50, any orders submitted after this time for CPU's will not be able to ship with the boards and probably won't be available for mailing until at least 6 weeks. Chipram also is low and only enough for 3 more boards so that will have to be for the next order also if required. The price will probably be a little higher dependent on how many more people are still wanting it.
I have investigated the price of the GAL's and the price for all 11 of them should be about $15 total (or less if someone can do better)
cool when do we pay for them and can you still ge that square chip isp sumit? aswell, ?
Quote:
Originally Posted by webheadx1
yup, that is part of the 11 chips. I'll wait and see if anyone can do better before i start anything with the GALs
i put a quote in to a company here in sunny england for the fpu,s and i got quoted 167 pounds each , lol i dont think ill be replying .
Quote:
Originally Posted by webheadx1
I'll go looking for a quote on them in a couple of weeks, hopefully theyre a "little" cheaper lol
Got mine off ebay some time back for around 25$ shipped, MC68882RC50A. seems about 35$ is the going rate.
I think i can get it cheaper than "Utsource" on Ebay, they do have a bit of a markup on their itemsQuote:
Originally Posted by BloodyCactus
not hard to compete with utsource, they are charging 50$!
GBA1000 1 $46,00
Cpu Socket 1 $5,00
Chip Ram 4 $5,92
Fast Ram 16 $27,04
Zorro Socket $1,00
RTC Clock 1 $4,50
Shipping To turkey ?
$89,46
hi kipper how much should I add shipping to Turkey
Hi,
I need:
1x CPU
1x CPU Socket
1x Chip mem for 1 board
1x Fast mem for 1 board
1x zorro 2 socket
2x video hyprid kit
2x video hyprid header pin
1x rtc clock
1x osc
--------
95,21$
please solder my TSOP too :)
Payment done.
Best regards
FD
Hi all,
components page updated, as usual, look for errors.
http://www.kipper2k.com/gb1000parts.htm
I reached the limit on my CPU's and chipmem that i purchased so i would have to create a new order for more which will take a few weeks so anyone who is added to the list after QQ1975b will have to wait for their order longer than those already purchased.
Hi Kipper,
I think it is not a problem - I have paid for TSOP service, and this has been indicated on PCB page, but has not on component page. If it is important - please, correct it, if not - leave as is.
Thx.
I got same issue, my purchase nick is yakumo9275.Quote:
this has been indicated on PCB page, but has not on component page. If it is important - please, correct it, if not - leave as is.
Thx.
PM sent
Quote:
Originally Posted by ITU
For Kipper2k
Also mine has only one TSOP but i need two!
@Kipper
Hi, could you please add x1 fastmem (16 per board) because i think i will regret it not buying the ram for my 2nd board right away.
Sending you $27.04
Total=202.92
Thank you
CUF
Payment sent but forgot to put my nickname.
Kipper2K
i send money 9,- for 1x Video Hybrid Kit and 4x Video Hybrid mobo 22 pin Header
edit to the list please
I'll update the list after work today
Quote:
Originally Posted by BloodyCactus
no worries, as long as you are on one or the other i will catch it
@ all; Pages should be updated now, let me know of errors or omissions.
one more update. I have checked the price of the 68881 and socket, price is $34 and $5 US for them, i will wait a while before i gauge interest so people can see what other options they have. Once i order, it will take about 3 weeks for them to reach me.
I also put in a second order for more CPU's and RAM so everyone who was requested one (and not yet paid) will be able to get one. I only put in a smaller order of 15 cpu's so once all the orders i have received are processed that leaves 10 more CPU's available
nice are you including gals soon?
for kipper2k
I'have just sent 89,49$ to ypur paypal account
GBA1000 1 $46,00
Cpu Socket 1 $5,00
Chip Ram 4 $5,92
Fast Ram 16 $27,04
Zorro Socket $1,00
RTC Clock 1 $4,50
Kipper2k, please add me to the list:
is shipping to germany for the board and the componets possible and how much i have to pay for this?
x1 MC6803050 CPU x1 CPU Socket x4 Chip mem x16 Fastmem x1 Zorro 2 socket x2 Video Hybrid complete, testet x2 Video Hybrid mobo 22 pin Header x1 MSM6242B RTC clock x1 Agnus x1 Osc 28.375mhz x1 TSOP
Thank you!
It's a good job i added a few extra boards to the total :)... I'll update it later toniteQuote:
Originally Posted by ozkano
Expect more people will want some boards even when this will be over.
I bet there are thousands that would have want one but never heard of Amibay or the other amiga related sites.
I'm sure someday there will be another run for gba1000 68060. But let's not talk about this right away lol.
I just got an email from someone on Ebay that is willing to sell me 50 Motorola XC68882RC33A FPU's for $25 US and cutting me some slack on the mailing costs.... I think this is a great deal for the 68882 33mhz FPU. It is cheaper than the quote i received for the 68881's
So.... my question is, How much interest is there for people to buy the FPU. I can get the socket for them for $5 each so i think it is a good deal. He is selling them on ebay for about $48 US incl shipping so i think it is a perfect chance at doing a group buy and saving cash... let me know if you are interested, if there is enough i can bundle it with the Gals...
my price would be $27 (US) once i get them here after duties, shipping etc
I see no need for an FPU for myself, not a whole lot that uses it :)
p.s.: That I am aware of anyway .. :cool:
In for a penny, in for a pound as they say! I'm in for the FPU as well :)
I am interested in FPU and the socket - price is very good. If you find GALs, I am interesred too.
Interested in FPU and socket.