Hi,Quote:
Originally Posted by oldman1000
I refunded the duplicate :)
Printable View
Hi,Quote:
Originally Posted by oldman1000
I refunded the duplicate :)
I didn't notice the payment update - am I still ok to order one ?
Mike
Quote:
Originally Posted by mjnurney
yup.
To order a board and see payment options go to the first post of this thread.
Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html
link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg
Jolly good :-)
---------- Post added at 23:02 ---------- Previous post was at 22:52 ----------
Payment sent :-)
added Mjnurney to the list.
To order a board and see payment options go to the first post of this thread.
Order closing date is 2200 (CST) Wed March 13th 2013.
Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html
link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg
@KipperQuote:
Originally Posted by kipper2k
Are the boards we are gonna get, have the parts needed written on the board? Because the illuwatar one has them. It's much easier to build it that way.
I'll check... i will supply a pdf with it nyway so you will be abe to see all the information at a glance (which is much easier)Quote:
Originally Posted by CUF85@KipperQuote:
Originally Posted by kipper2k
Are the boards we are gonna get, have the parts needed written on the board? Because the illuwatar one has them. It's much easier to build it that way.
Here is some pictures of my design of the video hybrid board (Rev 3)
I cant test it in my a500 as i don't have any sinlge line female headers (on order) and i cant be bothered to remove the one from the a500 and solder this one in untested so i will wait for the female headers to come before i test it. I'll sell these as kits or complete, they are such fiddly little buggers to solder.
The board can be soldered directly to the motherboard or in a 22 pin inline single socket
http://www.kipper2k.com/amiga/videoh...rid_front1.jpg
http://www.kipper2k.com/amiga/videoh...brid_back1.jpg
http://www.kipper2k.com/amiga/videoh...ybrid_top1.jpg
@Kipper
Great job! Hope it works. How much $$ would these be?
Quote:
Originally Posted by CUF85
Hmm, not sure, based on the time it takes mt to build them i would say $11 for complete tested... for a kit of parts/instructions i think $5 is a fair price
Forgive me for my ignorance but what exactly does the video hybrid do? :D
it produces the RGB video output for the A500 (and the GB1000)
Hi Kipper2k this is the payment for another gba 1000 with tsop soldered.
Thank you
@kipper2k
Do you want to ship all the boards first before you look into obtaining other components? I am in no hurry to get the board, I won't have time to work on it for a few months anyway, so I might aswell wait until later and arrange the shipping with any other components that become available through you.
I do understand if you can't / don't want to store the boards for long, if that is the case then of course I'll pay for the shipping now. Let me know what is best. :)
Quote:
Originally Posted by ajk
Hi,
I am going to ship the boards then worry about the components. As soon as i get the boards i want them gone :)
---------------------------------------------------------------------------
To order a board and see payment options go to the first post of this thread.
Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html
link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg
Payment sent for 1 board. Tsop required, whenever possible.
TNX!
Please count me if i am not to late for one Board?
dj.echo:thumbsup:
Quote:
Originally Posted by dj.echo
Hi,
No problem, you're good
To order a board and see payment options go to the first post of this thread.
Order closing date is 2200 (CST) Wed March 13th 2013.
Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html
link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg
Kipper2k has you see the payment for the second board? i dont see it in the list.
let me know how much i have to pay for shipment and tosp soldering in both the pcb.
thanks
I'll update in a bit, at work, busy :)Quote:
Originally Posted by toolkitman
thanks,
i have also to ask to you to change my address where to send the 2 pcb.
i have sent to you an email.
Without silkscreen :oQuote:
Originally Posted by kipper2k
I really hope that the final boards are with silkscreen....
What is a silkscreen?Quote:
Originally Posted by spock-79Without silkscreen :oQuote:
Originally Posted by kipper2k
I really hope that the final boards are with silkscreen....
It does have a simplified silk screen! If you can't build this with the PCB layout PDF and schematic the projects probably not for you to be honest. I do wonder what percentage of boards will be completed.Quote:
Originally Posted by spock-79Without silkscreen :oQuote:
Originally Posted by kipper2k
I really hope that the final boards are with silkscreen....
---------- Post added at 18:06 ---------- Previous post was at 18:03 ----------
Basically writing on the board which usually details where components are placed and copyright info etc. The board in the first post has it. This version does not have as much detail.Quote:
Originally Posted by TajmasterWhat is a silkscreen?Quote:
Originally Posted by spock-79Without silkscreen :oQuote:
Originally Posted by kipper2k
I really hope that the final boards are with silkscreen....
Ahh I get it:thumbsup:
Payment sent for TSOP :wink:
As for completing the board, parts won't be a problem I think, although the price tag will be quite high, as long as somebody can solder it on there, the board will be working some day.
Yep - I'd call these long term projects. They won't be completed over night but id frame it and put it on display if my wife let me!Quote:
Originally Posted by Buzzfuzz
Hi
Payment sent for one bord TSOP.
pitb
I have to ask is this a scan doubler and flicker fixer can we have some more info on this..Quote:
Originally Posted by kipper2kI'll check... i will supply a pdf with it nyway so you will be abe to see all the information at a glance (which is much easier)Quote:
Originally Posted by CUF85@KipperQuote:
Originally Posted by kipper2k
Are the boards we are gonna get, have the parts needed written on the board? Because the illuwatar one has them. It's much easier to build it that way.
Here is some pictures of my design of the video hybrid board (Rev 3)
I cant test it in my a500 as i don't have any sinlge line female headers (on order) and i cant be bothered to remove the one from the a500 and solder this one in untested so i will wait for the female headers to come before i test it. I'll sell these as kits or complete, they are such fiddly little buggers to solder.
The board can be soldered directly to the motherboard or in a 22 pin inline single socket
http://www.kipper2k.com/amiga/videoh...rid_front1.jpg
http://www.kipper2k.com/amiga/videoh...brid_back1.jpg
http://www.kipper2k.com/amiga/videoh...ybrid_top1.jpg
:coffee:
I have seen a power supply pcb in Illuwatar site, is it possible to have 2 of this?
That's one he designed. I don't know if he ever built it. It would be possible to design one but when a pico itx PSU can power this I'm not sure there would be any point :).
thank you or the answer, can you tell me ecxactly what kind of pico psu is needed?
how many watt and connector.
---------- Post added at 22:41 ---------- Previous post was at 22:14 ----------
anyone know where to find fat agnus 69-03?
nope, it performs the same functions as the CXA1145 in the A600 controlling the RGB output to the 23pin video output.. you need this, either build one, buy one or remove it from an old A500.Quote:
Originally Posted by ChrisUnionNJ
Quote:
Originally Posted by kipper2knope, it performs the same functions as the CXA1145 in the A600 controlling the RGB output to the 23pin video output.. you need this, either build one, buy one or remove it from an old A500.Quote:
Originally Posted by ChrisUnionNJ
Oh that note the GBA1000 does have an optional built in scan doubler/ flicker fixer.
---------- Post added at 21:49 ---------- Previous post was at 21:48 ----------
This depends entirely on what hard disks you intend to use. I ordered a 120 watt model and will make an adapter to fit the A1000 power supply connector. I plan to create a new back plate for a standard ATX case. I can't bring myself to kill another A1000.Quote:
Originally Posted by toolkitman
for which you need the "Amber" chip i believe ?...
i received an email from someone who has lots of the 8375 agnus chip... 6 euro's each.. thoughts anyone ?
Yup. On the plus side I stepped in Unicorn poo earlier so I'm sure finding Amber chips will be easy now :)Quote:
Originally Posted by kipper2k
---------- Post added at 21:52 ---------- Previous post was at 21:51 ----------
That's cheap.Quote:
Originally Posted by kipper2k
Hey kipper, I think you missed adding TSOP service for me on the list. Please do. :thumbsup:
if are pin to pin with 8372b alias final 69-03, then ok, 2 for my friend toolkitmanQuote:
Originally Posted by kipper2k
add:
i suppose only fat agnus 318069-03 and 318069-18 pal and 318069-19 ntsc are ok for this project (318069-18/19 need one modify on one pin)
order 3e pcb :thumbsup:
+ TSOP
iirc Georg Braun said that only the pal agnus will work with this project.
---------- Post added at 21:00 ---------- Previous post was at 20:19 ----------
That's a pretty good price!:thumbsup:Quote:
Originally Posted by kipper2k
I want 2 please.
Thank you
Hi All,
I tried the video hybrid board i made and... it works fine :) (tested on my Rev 6a board) The original video hybrid chip was version 1 and the version 3 i made works great. The original chip was a pain to get off the motherboard as the ground pins are soldered directly to the ground plane and you need a fair bit of heat to get them off, i used chipquik and still had a problem so if you are going to attempt to salvage one take your time.
To order a board and see payment options go to the first post of this thread.
Order closing date is 2200 (CST) Wed March 13th 2013.
Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html
Hi Kipper2k,
if they are compatible add two 8375 agnus chip to my order.
Thanks
Payment for one board sent! :)
Is there a reference or a guide which not only lists what you need but the choices of potential sources? I have plenty of old Amigas so I take it I can rob alot of parts from those? The only down side of course is that the parts are not new...
Any recommendations would be good too, like kipper2k rendition is better because it is brand new AND ? =)
Because I won't be having mine built until some time in November, I do have the benefit of waiting to see what occurs or the disadvantage of missing out of some earlier deals
Hopefully I can strike a balance with the more knowledgeable insight of the entire team tuned into this project :-)
Thanks!
@kipper2k So if I gather from the thread, TSOP will be 3.50 CAD, the video hybrid will be 11.00 CAD, and 6 euro for the 8375. I'd like all three of these. Do you want us to pay now or when you receive the boards. I know there will be a ton of paperwork for you, and we don't want to overwhelm you :)
Kipper2K put the 3e pcb+TSOP on the list
monny send yesterday
webpage should be good now. Updated as of 0900 this morning.Quote:
Originally Posted by oldman1000
The person who is selling the 8375 Agnus lives in Germany. Is there anyone willing to do a purchase from him and handle that part... it would save on costs for mailing and duties etc?
Let me know.
LAST CHANCE FOR ORDERING BOARDS... CLOSES TODAY
To order a board and see payment options go to the first post of this thread.
Order closing date is 2200 (CST) Wed March 13th 2013.
Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html
For me from Germany is better : ).
Please add me to the TSOP service, I posted earlier but you must have missed it as it isn't shown on the list, thanks
sent from my DROID RAZR MAXX
Interested in the 8375 agnus chip with whoever goes ahead with that bit.
Now i have a question which may turn out to be daft, i've read that this board does have an optional scandoubler / flicker fixer, is there a problem with implementing this or sourcing the parts ?
Cheers Cryton
The problem with this portion will be the rare "Amber" chip... it is optional though as you can always use RGB output and ECS Indivision VGA outputQuote:
Originally Posted by Cryton
---------- Post added at 17:39 ---------- Previous post was at 17:37 ----------
updated :)Quote:
Originally Posted by optiguy