4 Attachment(s)
Amiga 500 with DCE Viper 520CD
Hello fellow Amigans,
I have a very lovely Commodore Amiga 500 V1.3 for sale...
Please take a moment to read the specifications...
System Configuration:
68020@33, 1MB CHIP, 8MB FAST RAM, Kick 1.3 / 3.0, HDD BUS, CD-ROM
Expansions:
1 MB CHIP RAM
(installed in the internal expansion slot, modded as Chip RAM)
DCE Viper 520CD Specifications
(installed in place of the original 68000 CPU)
CPU: Motorolla EC68020@33Mhz
FAST RAM: 8MB
KICKSTART: V3.0
IDE INTERFACE: 1 x 2.5", 2 x 3.5"
ΜΙΝΙ MEGI CHIP SLOT
* Switching between Kick 1.3 & Kick 3.0 using a small switch located
in the rear right of the Amiga.
* You can install a 2.5" disk on top of the DCE Viper.
* I provide a modded SCSI box, to install an aditional hard disk and a CD-ROM (the CD-ROM and the faceplates are provided with the SCSI box).
* Hard disk(s) are not provided with the Amiga.
Also...
* Original Commodore A500 Mouse
* Viper 520CD Manual (in German)
* Original A500 Motorolla 68000 CPU
This system runs Workbench 1.3 up to 3.9 (with softkicking)
Please note:
--------------
* The Amiga case has a crack in the front. However, when the case is closed and screwed properly it does not seem so bad...
* I don't know whether is a problem with the specific hard disk I have worked with or the A500, but there is a lot (and I meen a lot...) of waiting idle time for the system to start to boot...
This does not seem to affect other devices (CD-ROMs work fine...), and in a previous configuration with AmigaOS 3.9 and a external 80GB 3.5" HD from a Mac, everything worked fine...
If a fellow Amigan knows anything about this issue, please be free to contact me.
Price
-----
DCE Viper 520CD (separately): 250 EUR
Amiga 500, 1MB Chip, 68000 CPU, Mouse, SCSI Box (separately): 70 EUR
All of the lot... together... 300 EUR
* Shipping from Glyka Nera, Athens, Greece.
* Shipping is NOT included.
* I ship worldwide.
* I accept bank transfers and Paypal.
* The Commodore 128D and the 1084 monitor, shown in the pictures, are not included (lol)...
* If you require additional photos and details, please let me know...
Thanks a lot for watching!