Apollo 4040/4060

I'd like to sell an Accellerator board called APOLLO 4040/4060 with 68040 - 40Mhz CPU and 64MB (2 x 32MB simm) ram already on board. Completed with original manuals.

Someone told me that is the 3040 version but there's 4040/4060 stamped on the board. The pic has been downloaded from a website because have not a camera at this time, but I'm selling the same card.

I heard that this card can be modified; this card have both CPU and Crystal already on sockets. I not tried it yet because haven't the 68060 eprom however I can sell the following upgrade kit:

4 x simm sockets (brand new)
1 x MC68060RC50 CPU 68060 - 50 Mhz
1 x 50 Mhz crystal oscillator
1 x homemade 3.3V power supply pcb

The accellerator board works fine in my amiga 4000D os 3.9

Prices:

APOLLO 4040/4060 - 150 euro
Upgrade Kit - 40 euro
Both - 180 euro

Prices doesn't include shipping from Italy. I will ship only registered, no ordinary o priority with no tracking number. Shipping cost about 10 euro in europe.
I prefer wire transfer but paypal maybe available (gift payment)

just my 2c.
1c) is it 3040, as there are only two simm sockets, but angled = it will fit in A3000. PCB is only one(same) for both models.
2c) probably not upgradable as there are two old mach130 chips, leftmost chip unclear

Also, keep it an A3000 friendly accelerator. They are so rare...

I like chains comments. They are always so precise in questioning those deeper permutations. :thumbsup:

Just to add my 2c.

1c. The picture used on this thread is not the Card Owners. It is from the BBoAH board here: http://www.amiga-hardware.com/showhardware.cgi?HARDID=216

2c. 3040 does not mean it is an 030 CPU. Your board should have jumper settings for 060. Whilst 040/060 cpu's can be swapped around, 030 is not the same pin array.

I'm really interested in the question regarding the mach130 chips?
One of the better reasons to use your own picture. :nod:

Kin

I'm interested...

Can you post or send some pictures of the actual card?

If possible please include some information on the "homemade" 3.3V PCB for the 68060... was it made according to an official guide or of own design?

Also, was the 060 / oscillator / 3.3V pcb tested and working or is it sold "as is" ?

Thanks in advance.

Hello, thanks for in terest, I will place pictures and more info tomorrow.

I'm also interested if mousehouse won't take it. PM goes.

Quote:

---

Originally Posted by mousehouse

I'm interested...

Can you post or send some pictures of the actual card?

If possible please include some information on the "homemade" 3.3V PCB for the 68060... was it made according to an official guide or of own design?

Also, was the 060 / oscillator / 3.3V pcb tested and working or is it sold "as is" ?

Thanks in advance.

---

Hello, here's the pictures of the actual card, (i forgot to insert in the pic the four simm sockets).
The homemade 3.3V PCB is the same that built an user on EAB, the CPU + CRYSTAL + 3.3V PCB are working.
The apollo 4040 already have 64MB (2 x 32MB simm) onboard, the CPU is socketed, the CRYSTAL OSCILLATOR is socketed and you can adjust jumpers to mount a 060 cpu.
Also I got manuals and driver disk.

still we dont know if it have mach131 chips :)

The card is still available for sale. Please contact me for further info.